On Wed, Jan 8, 2014 at 2:05 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote: > On Tue, Jan 07, 2014 at 10:50:36PM +0000, Feng Kan wrote: >> Add X-Gene reboot device tree node documentation. >> >> Signed-off-by: Feng Kan <fkan@xxxxxxx> >> --- >> .../devicetree/bindings/arm64/xgene/reboot.txt | 10 ++++++++++ >> 1 files changed, 10 insertions(+), 0 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/arm64/xgene/reboot.txt >> >> diff --git a/Documentation/devicetree/bindings/arm64/xgene/reboot.txt b/Documentation/devicetree/bindings/arm64/xgene/reboot.txt >> new file mode 100644 >> index 0000000..51d23c1 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm64/xgene/reboot.txt >> @@ -0,0 +1,10 @@ >> +Reboot property to control system reboot on storm platforms: >> + >> +The register attribute contain the address of the reset register. > > Required properties: > > - compatible: should contain "apm,xgene-reboot" > > - reg: the base address and size of the reset register. > >> + >> +Example: >> + >> + reboot@0 { >> + compatible = "apm,xgene-reboot"; >> + reg = <0x0 0x17000014 0x0 0x4>; >> + }; > > Given this seems to be a 64-bit address, the unit address should > preferably be 0,17000014 rather than just 0. FKAN: Mark, can I keep this as it is to be consistent with the reset of the file? > > Thanks, > Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html