On 02/06/17 15:04, Boris Brezillon wrote: > Document the bindings used for the Cadence DSI bridge. > > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> > --- > .../bindings/display/bridge/cdns,dsi.txt | 55 ++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt > > diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt > new file mode 100644 > index 000000000000..770c5c5b1e93 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt > @@ -0,0 +1,55 @@ > +Cadence DSI bridge > +================== > + > +The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. > + > +Required properties: > +- compatible: should be set to "cdns,dsi". > +- reg: physical base address and length of the controller's registers. > +- interrupts: interrupt line connected to the DSI bridge. > +- clocks: DSI bridge clocks. > +- clock-names: must contain "pclk" and "sysclk". clock-names doesn't match the example below. > +- phys: phandle link to the MIPI D-PHY controller. > +- phy-names: must contain "dphy". > +- #address-cells: must be set to 1. > +- #size-cells: must be set to 0. > + > +Required subnodes: > +- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. > + Currently contains a single input port at address 0 representing the DPI > + input. Other ports will be added later to support the SDI inputs. Typo with "SDI". Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
