On Sun, 2017-06-04 at 20:33 +0200, Martin Blumenstingl wrote: > This removes the dummy clk81 gate and replaces it with the actual clock > controller's CLKID_CLK81. This will also allow us to pass the real clock > IDs to all devices where the clock is controlled by clkc in the future. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> This is going in the right direction and at least align meson8 and meson8b. Acked-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Later on, I'm wondering if some of these clock assignments should be moved to meson.dtsi ? meson8.dtsi and meson8b.dtsi look very similar > --- > arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++---------------- > 1 file changed, 16 insertions(+), 16 deletions(-) > > diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi > index 6993077331c7..9b0b3ddbb17e 100644 > --- a/arch/arm/boot/dts/meson8.dtsi > +++ b/arch/arm/boot/dts/meson8.dtsi > @@ -43,6 +43,7 @@ > * OTHER DEALINGS IN THE SOFTWARE. > */ > > +#include <dt-bindings/clock/meson8b-clkc.h> > #include <dt-bindings/gpio/meson8-gpio.h> > /include/ "meson.dtsi" > > @@ -82,13 +83,6 @@ > reg = <0x203>; > }; > }; > - > - clk81: clk@0 { > - #clock-cells = <0>; > - compatible = "fixed-clock"; > - clock-frequency = <141666666>; > - }; > - > }; /* end of / */ > > &aobus { > @@ -126,6 +120,12 @@ > }; > > &cbus { > + clkc: clock-controller@4000 { > + #clock-cells = <1>; > + compatible = "amlogic,meson8-clkc"; > + reg = <0x8000 0x4>, <0x4000 0x460>; > + }; > + > pinctrl_cbus: pinctrl@9880 { > compatible = "amlogic,meson8-cbus-pinctrl"; > reg = <0x9880 0x10>; > @@ -172,20 +172,20 @@ > }; > > ðmac { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > clock-names = "stmmaceth"; > }; > > &i2c_AO { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &i2c_A { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &i2c_B { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &L2 { > @@ -195,21 +195,21 @@ > }; > > &spifc { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_AO { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_A { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_B { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_C { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html