Hi, This patch series adds support for the Marvell 88x3310 PHY found on the SolidRun Macchiatobin board. The first patch introduces a set of generic Clause 45 PHY helpers that C45 PHY drivers can make use of if they wish. Patch 2 fixes the aneg restart to be compatible with C45 PHYs - it can currently only cope with C22 PHYs. Patch 3 moves the "gen10g" driver into the Clause 45 code, grouping all core clause 45 code together. Patch 4 adds the phy_interface_t types for XAUI and 10GBase-KR links. As 10GBase-KR appears to be compatible with XFI and SFI, XFI and SFI, I currently see no reason to add XFI and SFI interface modes. There seems to be vendor code out there using these, but they all alias back to the same hardware settings. Patch 5 adds support for the MV88X3310 PHY, which supports both the copper and fiber interfaces. It should be noted that the MV88X3310 automatically switches its MAC facing interface between 10GBase-KR and SGMII depending on the negotiated speed. This was discussed with Florian, and we agreed to update the phy interface mode depending on the properties of the actual link mode to the PHY. Documentation/devicetree/bindings/net/ethernet.txt | 2 + MAINTAINERS | 6 + drivers/net/phy/Makefile | 4 +- drivers/net/phy/marvell10g.c | 364 +++++++++++++++++++++ drivers/net/phy/phy-c45.c | 295 +++++++++++++++++ drivers/net/phy/phy.c | 23 +- drivers/net/phy/phy_device.c | 113 ++----- include/linux/phy.h | 20 ++ 8 files changed, 729 insertions(+), 98 deletions(-) -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
