This patchset adds initial support of Broadcom Stingray SOC by reusing existing Broadcom iProc device drivers. Most of the patches in this patchset are DT patches except the Stingray clock tree support which just one patch. This patchset is based on Linux-4.12-rc2 and it is also available at stingray-v5 branch of https://github.com/Broadcom/arm64-linux.git Changes since v4: - Reduce number of include headers in Stingray clk driver Changes since v3: - Rebased patches for Linux-4.12-rc1 - Updated PATCH3 to have all clocks except genpll3 to be registered via platform driver probe Changes since v2: - Remove default bootargs from chosen DT node - Remove "linux" prefix from stdout DT attribute of chosen DT node - Remove use of GIC_CPU_MASK_xxx() for PPIs Changes since v1: - Rebased patches for Linux-4.12-rc1 - Removed unwanted /memreserve/ from bcm958742-base.dtsi - Use ranges DT property to clear view of memory-layout - Make bcm-sr.h part of clock DT bindings patch Anup Patel (3): dt-bindings: bcm: Add Broadcom Stingray bindings document arm64: dts: Initial DTS files for Broadcom Stingray SOC arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Oza Pawandeep (1): arm64: dts: Add I2C DT nodes for Stingray SoC Pramod Kumar (3): arm64: dts: Add NAND DT nodes for Stingray SOC arm64: dts: Add pinctrl DT nodes for Stingray SOC arm64: dts: Add GPIO DT nodes for Stingray SOC Sandeep Tripathy (3): dt-bindings: clk: Extend binding doc for Stingray SOC clk: bcm: Add clocks for Stingray SOC arm64: dts: Add clock DT nodes for Stingray SOC Srinath Mannam (1): arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC .../devicetree/bindings/arm/bcm/brcm,stingray.txt | 12 + .../bindings/clock/brcm,iproc-clocks.txt | 76 ++++ arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 + .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 131 ++++++ .../boot/dts/broadcom/stingray/bcm958742k.dts | 78 ++++ .../boot/dts/broadcom/stingray/bcm958742t.dts | 40 ++ .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 ++++++++ .../dts/broadcom/stingray/stingray-pinctrl.dtsi | 345 ++++++++++++++++ .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 460 +++++++++++++++++++++ drivers/clk/bcm/Kconfig | 8 + drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-sr.c | 320 ++++++++++++++ include/dt-bindings/clock/bcm-sr.h | 101 +++++ .../dt-bindings/pinctrl/brcm,pinctrl-stingray.h | 68 +++ 15 files changed, 1817 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi create mode 100644 drivers/clk/bcm/clk-sr.c create mode 100644 include/dt-bindings/clock/bcm-sr.h create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
