FPGA Manager passive serial can now support Stratix, Cyclone and Arria FPGAs. Thanks to Bastian and Anatolij for helping to extend support beyond Cyclone changes from v10 - Rebase on v4.12-rc2 - Remove an erroneous cyclone-ps-spi.o reference from drivers/fpga/Makefile - Change FPGA_MGR_SPI_BITSTREAM_LSB_FIRST tp FPGA_MGR_BITSTREAM_LSB_FIRST - Change CONF_DONE "low" to "inactive" in an error message - Add a MODULE_DEVICE_TABLE for SPI - Patches 1-4 can be merged without 5 and 6 - Patches 5, and 6 Add back in the bitrev8x4 speed up code newly with support for any size buffer. Anatolij Gustschin (1): fpga: Add flag to indicate SPI bitstream is bit-reversed Joshua Clayton (4): doc: dt: add altera-ps-spi binding document fpga manager: Add altera-ps-spi driver for Altera FPGAs ARM: dts: imx6q-evi: support altera-ps-spi lib: add bitrev8x4() fpga-manager: altera-ps-spi: use bitrev8x4 .../bindings/fpga/altera-passive-serial.txt | 29 ++ arch/arm/boot/dts/imx6q-evi.dts | 16 ++ drivers/fpga/Kconfig | 7 + drivers/fpga/Makefile | 1 + drivers/fpga/altera-ps-spi.c | 307 +++++++++++++++++++++ include/linux/bitrev.h | 19 ++ include/linux/fpga/fpga-mgr.h | 2 + 7 files changed, 381 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/altera-passive-serial.txt create mode 100644 drivers/fpga/altera-ps-spi.c -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
