the previous setting of act8846 is just copy from firefly board. but the reload board is a little different from firefly board. let's correct it. Signed-off-by: Eddie Cai <eddie.cai.linux@xxxxxxxxx> --- arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 8134966..4cfa109 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -179,6 +179,7 @@ regulator-name = "vccio_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; }; vdd10_lcd: REG6 { @@ -187,24 +188,23 @@ regulator-max-microvolt = <1000000>; }; - vcca_18: REG7 { - regulator-name = "vcca_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + vcca_33: REG7 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; - vcca_33: REG8 { - regulator-name = "vcca_33"; + vcc_lan: REG8 { + regulator-name = "vcc_lan"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; - vcc_lan: REG9 { - regulator-name = "vcca_lan"; + vccio_pmu: REG9 { + regulator-name = "vccio_pmu"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; vdd_10: REG10 { @@ -218,6 +218,7 @@ regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; vcc18_lcd: REG12 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html