HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT
respectively.
All of them are implemented as GPIO.
Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 48 +++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 6de86c0..4839885 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -48,6 +48,54 @@
linux,code = <KEY_POWER>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ status = "disabled";
+ user_led1 {
+ label = "user_led1";
+ /* gpio_150_user_led1 */
+ gpios = <&gpio18 6 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "user_led2";
+ /* gpio_151_user_led2 */
+ gpios = <&gpio18 7 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "user_led3";
+ /* gpio_189_user_led3 */
+ gpios = <&gpio23 5 0>;
+ default-state = "off";
+ };
+
+ user_led4 {
+ label = "user_led4";
+ /* gpio_190_user_led4 */
+ gpios = <&gpio23 6 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ wlan_active_led {
+ label = "wifi_active";
+ /* gpio_205_wifi_active */
+ gpios = <&gpio25 5 0>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "bt_active";
+ gpios = <&gpio25 7 0>;
+ /* gpio_207_user_led1 */
+ linux,default-trigger = "hci0rx";
+ default-state = "off";
+ };
+ };
};
};
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
