Re: [PATCH v13 00/12] power: add power sequence library

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, May 16, 2017 at 07:28:55PM +0200, Krzysztof Kozlowski wrote:
> On Wed, Feb 15, 2017 at 09:38:09AM +0800, Peter Chen wrote:
> > On Tue, Feb 14, 2017 at 12:21:48PM +0200, Roger Quadros wrote:
> > > Peter,
> > > 
> > > On 11/02/17 03:27, Peter Chen wrote:
> > > > Hi all,
> > > > 
> > > > This is a follow-up for my last power sequence framework patch set [1].
> > > > According to Rob Herring and Ulf Hansson's comments[2]. The kinds of
> > > > power sequence instances will be added at postcore_initcall, the match
> > > > criteria is compatible string first, if the compatible string is not
> > > > matched between dts and library, it will try to use generic power sequence.
> > > > 	 
> > > > The host driver just needs to call of_pwrseq_on/of_pwrseq_off
> > > > if only one power sequence instance is needed, for more power sequences
> > > > are used, using of_pwrseq_on_list/of_pwrseq_off_list instead (eg, USB hub driver).
> > > > 
> > > > In future, if there are special power sequence requirements, the special
> > > > power sequence library can be created.
> > > > 
> > > > This patch set is tested on i.mx6 sabresx evk using a dts change, I use
> > > > two hot-plug devices to simulate this use case, the related binding
> > > > change is updated at patch [1/6], The udoo board changes were tested
> > > > using my last power sequence patch set.[3]
> > > > 
> > > > Except for hard-wired MMC and USB devices, I find the USB ULPI PHY also
> > > > need to power on itself before it can be found by ULPI bus.
> > > 
> > > Can patches 3-7 can be sent independently of the power related patches?
> > > 
> > 
> > Yes, I had planned to submit patches 3-7 for v4.11-rc1 today first, but it
> > seems you still have comments for patch 6, let's wait a conclusion first.
> 
> Hi Peter and others,
> 
> What is the status of this patchset? I looked recently and it seemd
> not-merged. Are there any issues not dealt with?
> 
> Just to reminder, this patchset solves not only Peter's problem but few others
> as well, e.g. Odroid U3 USB hub/lan power sequence.
> 

The patches 3-7 has already at v4.12-rc1, and I will send power sequence
patch set again.

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux