[PATCH] dt-bindings: pinctrl: fix bias-pull,up typo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch fixes a shared typo in several qcom pinctrl dt-bindings.

Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index a7bde64798c7..8f07bcc4e59b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -37,7 +37,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
 
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.
 
 Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index bac627d619e6..4b1c583c51e9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -39,7 +39,7 @@ information about e.g. the mux function.
 
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
 
 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index 6e88e91feb11..fade9b9d158c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -37,7 +37,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
 
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.
 
 Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
index df9a838ec5f9..08f9ab2ed6fe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
@@ -37,7 +37,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
 
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.
 
 Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
index 453bd7c76d6b..e93bfa2872b5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -36,7 +36,7 @@ information about e.g. the mux function.
 
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
 
 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux