On 05/13/2017 04:33 PM, Andreas Färber wrote:
> Sort nodes referenced by label alphabetically.
>
> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> ---
> v1 -> v2:
> * Rebased (new nodes added)
>
> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 62 ++++++++++++------------
> 1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> index 0ec1d19522dd..d904deb1018c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> @@ -148,34 +148,36 @@
> };
> };
>
> -/* This UART is brought out to the DB9 connector */
> -&uart_AO {
> - status = "okay";
> - pinctrl-0 = <&uart_ao_a_pins>;
> - pinctrl-names = "default";
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> + };
> };
>
> -&ir {
> +&hdmi_tx {
> status = "okay";
> - pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> pinctrl-names = "default";
> };
>
> -&usb0_phy {
> - status = "okay";
> - phy-supply = <&usb_pwr>;
> -};
> -
> -&usb1_phy {
> - status = "okay";
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> };
>
> -&usb0 {
> +&ir {
> status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> };
>
> -&usb1 {
> +&pwm_ef {
> status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> };
>
> /* Wireless SDIO Module */
> @@ -242,28 +244,26 @@
> vqmmc-supply = <&vddio_boot>;
> };
>
> -&pwm_ef {
> +/* This UART is brought out to the DB9 connector */
> +&uart_AO {
> status = "okay";
> - pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-0 = <&uart_ao_a_pins>;
> pinctrl-names = "default";
> - clocks = <&clkc CLKID_FCLK_DIV4>;
> - clock-names = "clkin0";
> };
>
> -&cvbs_vdac_port {
> - cvbs_vdac_out: endpoint {
> - remote-endpoint = <&cvbs_connector_in>;
> - };
> +&usb0_phy {
> + status = "okay";
> + phy-supply = <&usb_pwr>;
> };
>
> -&hdmi_tx {
> +&usb1_phy {
> status = "okay";
> - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> - pinctrl-names = "default";
> };
>
> -&hdmi_tx_tmds_port {
> - hdmi_tx_tmds_out: endpoint {
> - remote-endpoint = <&hdmi_connector_in>;
> - };
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> };
>
Hi Andreas,
Like a previous attempt, I'm not OK with such rework since it will break bisect and add complexity for new patches handling.
The order is not alphabetically ordered, live with it.
Neil
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
