Sort nodes referenced by label alphabetically. Signed-off-by: Andreas Färber <afaerber@xxxxxxx> --- v1 -> v2: * Rebased (new nodes added) arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 62 ++++++++++++------------ 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 0ec1d19522dd..d904deb1018c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -148,34 +148,36 @@ }; }; -/* This UART is brought out to the DB9 connector */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; -&ir { +&hdmi_tx { status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; }; -&usb0_phy { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&usb1_phy { - status = "okay"; +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; -&usb0 { +&ir { status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; }; -&usb1 { +&pwm_ef { status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; }; /* Wireless SDIO Module */ @@ -242,28 +244,26 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { +/* This UART is brought out to the DB9 connector */ +&uart_AO { status = "okay"; - pinctrl-0 = <&pwm_e_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; }; -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; +&usb0_phy { + status = "okay"; + phy-supply = <&usb_pwr>; }; -&hdmi_tx { +&usb1_phy { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; }; -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; }; -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html