This patch is to enable SD UHS-I mode and eMMC HS200 mode on LS1046ARDB in dts. Also, the eSDHC peripheral clock must be used instead of platform clock to support these modes. Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx> --- Changes for v2: - Sorted the node. Changes for v3: - None. --- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 8 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index c5361e9..2d28726 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -72,6 +72,14 @@ status = "okay"; }; +&esdhc { + mmc-hs200-1_8v; + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 7ef2b9f..5975d30 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -210,10 +210,10 @@ }; esdhc: esdhc@1560000 { - compatible = "fsl,esdhc"; + compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <0>; + clocks = <&clockgen 2 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html