This patchset is to add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa. Also add eSDHC node for ls1088a. Because eSDHC is not a standard SD controller, the specific speed mode support depends on board's peripheral circuit for eSDHC. So, we have to add these speed modes support on board dts file. In additon, these dts patches depends on esdhc driver patches which just had been merged on mmc.git. Otherwise, the UHS-I SD card and eMMC HS200 card would fail to be initialized, but other cards still could work fine. https://patchwork.kernel.org/patch/9689875/ https://patchwork.kernel.org/patch/9689877/ https://patchwork.kernel.org/patch/9689879/ https://patchwork.kernel.org/patch/9689887/ https://patchwork.kernel.org/patch/9689885/ Yangbo Lu (5): mmc: dt: add compatible into eSDHC required properties arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS arm64: dts: ls1012a: add eSDHC nodes arm64: dts: ls1088a: add esdhc node .../devicetree/bindings/mmc/fsl-esdhc.txt | 14 ++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 8 +++++++ arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 13 +++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 25 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 8 +++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 12 +++++++++++ arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 1 + arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 +- 12 files changed, 96 insertions(+), 3 deletions(-) -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
