[PATCH v2 12/20] drm/sun4i: tcon: Fix tcon channel 1 backporch calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




It seems like what's called a backporch in the datasheet is actually the
backporch plus the sync period. Fix that in our driver.

Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 1c609d808b86..86a806fae9fb 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -262,7 +262,7 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
 
 	/* Set horizontal display timings */
-	bp = mode->crtc_htotal - mode->crtc_hsync_end;
+	bp = mode->crtc_htotal - mode->crtc_hsync_start;
 	DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
 			 mode->htotal, bp);
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
@@ -270,7 +270,7 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
 
 	/* Set vertical display timings */
-	bp = mode->crtc_vtotal - mode->crtc_vsync_end;
+	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
 	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
 			 mode->vtotal, bp);
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
-- 
git-series 0.8.11
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux