Some regulators have different settling times for voltage increases and decreases. To avoid a time penalty on the faster transition allow for different settings for up- and downward transitions. Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> --- Changes in v2: - Don't remove settling_time property - Split DT bindings doc into separate patch drivers/regulator/core.c | 6 ++++++ drivers/regulator/of_regulator.c | 9 +++++++++ include/linux/regulator/machine.h | 6 ++++++ 3 files changed, 21 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 811096b23143..7836f07431d8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2775,6 +2775,12 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev, ramp_delay = rdev->desc->ramp_delay; else if (rdev->constraints->settling_time) return rdev->constraints->settling_time; + else if (rdev->constraints->settling_time_up && + (new_uV > old_uV)) + return rdev->constraints->settling_time_up; + else if (rdev->constraints->settling_time_down && + (new_uV < old_uV)) + return rdev->constraints->settling_time_down; if (ramp_delay == 0) { rdev_dbg(rdev, "ramp_delay not set\n"); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 09d677d5d3f0..b0a007c349ef 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -90,6 +90,15 @@ static void of_get_regulation_constraints(struct device_node *np, if (!ret) constraints->settling_time = pval; + ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval); + if (!ret) + constraints->settling_time_up = pval; + + ret = of_property_read_u32(np, "regulator-settling-time-down-us", + &pval); + if (!ret) + constraints->settling_time_down = pval; + ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval); if (!ret) constraints->enable_time = pval; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 117699d1f7df..9cd4fef37203 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -110,6 +110,10 @@ struct regulator_state { * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @settling_time: Time to settle down after voltage change when voltage * change is non-linear (unit: microseconds). + * @settling_time_up: Time to settle down after voltage increase when voltage + * change is non-linear (unit: microseconds). + * @settling_time_down : Time to settle down after voltage decrease when + * voltage change is non-linear (unit: microseconds). * @active_discharge: Enable/disable active discharge. The enum * regulator_active_discharge values are used for * initialisation. @@ -152,6 +156,8 @@ struct regulation_constraints { unsigned int ramp_delay; unsigned int settling_time; + unsigned int settling_time_up; + unsigned int settling_time_down; unsigned int enable_time; unsigned int active_discharge; -- 2.13.0.rc0.306.g87b477812d-goog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html