Re: [PATCH 06/13] MIPS: lantiq: Convert the xbar driver to a platform_driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 04/20/2017 04:48 PM, Rob Herring wrote:
> On Mon, Apr 17, 2017 at 09:29:35PM +0200, Hauke Mehrtens wrote:
>> From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
>>
>> This allows using the xbar driver on ARX300 based SoCs which require the
>> same xbar setup as the xRX200 chipsets because the xbar driver
>> initialization is not guarded by an xRX200 specific
>> of_machine_is_compatible condition anymore. Additionally the new driver
>> takes a syscon phandle to configure the XBAR endianness bits in RCU
>> (before this was done in arch/mips/lantiq/xway/reset.c and also
>> guarded by an xRX200 specific if-statement).
>>
>> Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/mips/lantiq/xbar.txt       |  22 +++++
>>  MAINTAINERS                                        |   1 +
>>  arch/mips/lantiq/xway/reset.c                      |   4 -
>>  arch/mips/lantiq/xway/sysctrl.c                    |  41 ---------
>>  drivers/soc/Makefile                               |   1 +
>>  drivers/soc/lantiq/Makefile                        |   1 +
>>  drivers/soc/lantiq/xbar.c                          | 100 +++++++++++++++++++++
>>  7 files changed, 125 insertions(+), 45 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/mips/lantiq/xbar.txt
>>  create mode 100644 drivers/soc/lantiq/Makefile
>>  create mode 100644 drivers/soc/lantiq/xbar.c
>>
>> diff --git a/Documentation/devicetree/bindings/mips/lantiq/xbar.txt b/Documentation/devicetree/bindings/mips/lantiq/xbar.txt
>> new file mode 100644
>> index 000000000000..86e53ff3b0d5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mips/lantiq/xbar.txt
>> @@ -0,0 +1,22 @@
>> +Lantiq XWAY SoC XBAR binding
>> +============================
>> +
>> +
>> +-------------------------------------------------------------------------------
>> +Required properties:
>> +- compatible	: Should be "lantiq,xbar-xway"
> 
> This compatible is already in use so it is fine, but you should also 
> have per SoC compatible strings.

I will add a new SoC specific one.
What does per SoC device tree mean? Does it mean for the same silicon,
for the same silicon revision, for the same fusing of a silicon or for
the same marketing name?

I would like to make it per silicon or per silicon revision for the IP
cores which I know are different.

Hauke
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux