The RCU (Reset controller Unit) register block provides many different functionalities. Before they were handed by the code in arch/mips/lantiq /xway/reset.c, now there are separate drivers for the functionality. This block provides support for reset controller, GPHY firmware loading, USB PHY initialization and cross bar configuration. These changes are making the old device tree incompatible with the current kernel. The upstream Linux kernel supports loading the device tree blob from the boot loader since about one year, the latest released vendor kernel does not support loading the device tree from a bot loader. I would prefer if this would go through the mips tree. There are more patches planed which would convert the Lantiq code to the common clock framework. Hauke Mehrtens (4): mtd: lantiq-flash: drop check of boot select mtd: spi-falcon: drop check of boot select watchdog: lantiq: access boot cause register through regmap MIPS: lantiq: remove old GPHY loader code Martin Blumenstingl (9): MIPS: lantiq: Use of_platform_populate instead of __dt_register_buses MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD MIPS: lantiq: Convert the xbar driver to a platform_driver MIPS: lantiq: remove ltq_reset_cause() and ltq_boot_select() reset: Add a reset controller driver for the Lantiq XWAY based SoCs MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module Documentation: DT: MIPS: lantiq: Add docs for the RCU bindings MIPS: lantiq: Remove the arch/mips/lantiq/xway/reset.c implementation .../devicetree/bindings/mips/lantiq/rcu-gphy.txt | 54 +++ .../devicetree/bindings/mips/lantiq/rcu.txt | 82 +++++ .../devicetree/bindings/mips/lantiq/xbar.txt | 22 ++ .../bindings/phy/phy-lantiq-rcu-usb2.txt | 59 ++++ .../devicetree/bindings/reset/lantiq,rcu-reset.txt | 43 +++ MAINTAINERS | 1 + arch/mips/include/asm/mach-lantiq/lantiq.h | 4 - arch/mips/lantiq/Kconfig | 2 + arch/mips/lantiq/falcon/reset.c | 22 -- arch/mips/lantiq/prom.c | 3 +- arch/mips/lantiq/xway/Makefile | 4 +- arch/mips/lantiq/xway/reset.c | 387 --------------------- arch/mips/lantiq/xway/sysctrl.c | 69 +--- arch/mips/lantiq/xway/xrx200_phy_fw.c | 113 ------ drivers/mtd/maps/lantiq-flash.c | 6 - drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-lantiq-rcu-usb2.c | 325 +++++++++++++++++ drivers/reset/Kconfig | 6 + drivers/reset/Makefile | 1 + drivers/reset/reset-lantiq-rcu.c | 231 ++++++++++++ drivers/soc/Makefile | 1 + drivers/soc/lantiq/Makefile | 2 + drivers/soc/lantiq/gphy.c | 242 +++++++++++++ drivers/soc/lantiq/xbar.c | 100 ++++++ drivers/spi/spi-falcon.c | 5 - drivers/watchdog/lantiq_wdt.c | 47 ++- include/dt-bindings/mips/lantiq_rcu_gphy.h | 15 + 28 files changed, 1255 insertions(+), 600 deletions(-) create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu.txt create mode 100644 Documentation/devicetree/bindings/mips/lantiq/xbar.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt create mode 100644 Documentation/devicetree/bindings/reset/lantiq,rcu-reset.txt delete mode 100644 arch/mips/lantiq/xway/reset.c delete mode 100644 arch/mips/lantiq/xway/xrx200_phy_fw.c create mode 100644 drivers/phy/phy-lantiq-rcu-usb2.c create mode 100644 drivers/reset/reset-lantiq-rcu.c create mode 100644 drivers/soc/lantiq/Makefile create mode 100644 drivers/soc/lantiq/gphy.c create mode 100644 drivers/soc/lantiq/xbar.c create mode 100644 include/dt-bindings/mips/lantiq_rcu_gphy.h -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
