On 13 April 2017 at 06:32, Andrey Smirnov <andrew.smirnov@xxxxxxxxx> wrote: > Shawn, everyone: > > This series includes changes made to device-tree in order to support > PCIe on i.MX7 platform. They include: > > - Bringing 'anatop-enable-bit' property of ANATOP regulators back > and extending it to all of the HW it is applicable to > > - Adding GPCv2 node for i.MX7 (which was missing, despite the > irqchip driver for it being in the tree for quite some time) > > - Adding a PCIe node for i.MX7 > > - Adding GPIO expander used by PCIe and enabling PCIe node from > above on i.MX7 based Sabre board > > As usual, feedback is welcome. > > Thanks, > Andrey Smrinov > > Andrey Smirnov (8): > Revert "ARM: dts: imx: Remove unexistant property" > ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate > ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d' > ARM: dts: imx7s: Add node for GPC > ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant > ARM: dts: imx7d-sdb: Add GPIO expander node > ARM: dts: imx7d: Add node for PCIe controller > ARM: dts: imx7d-sdb: Enable PCIe peripheral FWIW: Tested-by: Tyler Baker <tyler.baker@xxxxxxxxxx> This whole series on top of v4.11-rc7, with the addition of the iMX7 GPCv2 and reset driver. Tested on a imx7d-cl-som with a CUK Killer Doubleshot Wireless-AC 1535 wlan/bt radio using a mini pcie to m2 adapter. Confirmed that the radio was able to associate with an AP using WPA2, and connected to multiple devices using 6lowpan over BLE. Tyler -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
