Shawn, everyone:
This series includes changes made to device-tree in order to support
PCIe on i.MX7 platform. They include:
- Bringing 'anatop-enable-bit' property of ANATOP regulators back
and extending it to all of the HW it is applicable to
- Adding GPCv2 node for i.MX7 (which was missing, despite the
irqchip driver for it being in the tree for quite some time)
- Adding a PCIe node for i.MX7
- Adding GPIO expander used by PCIe and enabling PCIe node from
above on i.MX7 based Sabre board
As usual, feedback is welcome.
Thanks,
Andrey Smrinov
Andrey Smirnov (8):
Revert "ARM: dts: imx: Remove unexistant property"
ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate
ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d'
ARM: dts: imx7s: Add node for GPC
ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant
ARM: dts: imx7d-sdb: Add GPIO expander node
ARM: dts: imx7d: Add node for PCIe controller
ARM: dts: imx7d-sdb: Enable PCIe peripheral
arch/arm/boot/dts/imx6qdl.dtsi | 3 +++
arch/arm/boot/dts/imx6sl.dtsi | 3 +++
arch/arm/boot/dts/imx6sx.dtsi | 3 +++
arch/arm/boot/dts/imx6ul.dtsi | 1 +
arch/arm/boot/dts/imx7d-sdb.dts | 39 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 31 +++++++++++++++++++++++++++++--
7 files changed, 116 insertions(+), 2 deletions(-)
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
