On 06-01-2014 10:46, Zhang Rui wrote: > On Mon, 2014-01-06 at 08:36 -0400, Eduardo Valentin wrote: >> Hello all, >> >> Now that the basic thermal DT support is merged into Rui's tree, >> I am resending this series, which introduces the DT node entries >> for DRA7 thermal limits representation. >> >> The series adds two thermal zones, to represent IVA and DSPEVE, >> respectively. It also adds the support to tmp102 and a corresponding >> pcb thermal zone. >> >> There are only cosmetic changes from v1. A couple of spaces and tabulations >> have been fixed, and minor changes in sentences present in commit log. >> One difference from V1 is the fact that now bandgap is introduced under >> OCP, which is also a minor diff. >> >> This patch series has been runtime tested on DRA7-evm. >> >> All best >> >> Eduardo Valentin (7): >> arm: dts: add dra7 DSPEVE thermal data >> arm: dts: add dra7 IVA thermal data >> arm: dts: dra7: add bandgap entry >> arm: dts: add cooling properties on dra7 cpu node >> arm: dts: dra7: add thermal data >> arm: dts: add tmp102 i2c sensor node on dra7-evm >> arm: dts: add thermal zones info on tmp102 for DRA7-EVM >> >> arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++ >> arch/arm/boot/dts/dra7-evm.dts | 22 ++++++++++++++++++++++ >> arch/arm/boot/dts/dra7-iva-thermal.dtsi | 28 ++++++++++++++++++++++++++++ >> arch/arm/boot/dts/dra7.dtsi | 26 ++++++++++++++++++++++++++ > > I'm okay with this patch set. But as long as this patch set does not > change any code under drivers/thermal/, I prefer these patches to go to > your thermal-soc tree first. No problem at all. I will be queuing them. > > thanks, > rui >> 4 files changed, 104 insertions(+) >> create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi >> create mode 100644 arch/arm/boot/dts/dra7-iva-thermal.dtsi >> > > > > -- You have got to be excited about what you are doing. (L. Lamport) Eduardo Valentin
Attachment:
signature.asc
Description: OpenPGP digital signature