On Mon, 2014-01-06 at 08:36 -0400, Eduardo Valentin wrote: > Hello all, > > Now that the basic thermal DT support is merged into Rui's tree, > I am resending this series, which introduces the DT node entries > for DRA7 thermal limits representation. > > The series adds two thermal zones, to represent IVA and DSPEVE, > respectively. It also adds the support to tmp102 and a corresponding > pcb thermal zone. > > There are only cosmetic changes from v1. A couple of spaces and tabulations > have been fixed, and minor changes in sentences present in commit log. > One difference from V1 is the fact that now bandgap is introduced under > OCP, which is also a minor diff. > > This patch series has been runtime tested on DRA7-evm. > > All best > > Eduardo Valentin (7): > arm: dts: add dra7 DSPEVE thermal data > arm: dts: add dra7 IVA thermal data > arm: dts: dra7: add bandgap entry > arm: dts: add cooling properties on dra7 cpu node > arm: dts: dra7: add thermal data > arm: dts: add tmp102 i2c sensor node on dra7-evm > arm: dts: add thermal zones info on tmp102 for DRA7-EVM > > arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/dra7-evm.dts | 22 ++++++++++++++++++++++ > arch/arm/boot/dts/dra7-iva-thermal.dtsi | 28 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/dra7.dtsi | 26 ++++++++++++++++++++++++++ I'm okay with this patch set. But as long as this patch set does not change any code under drivers/thermal/, I prefer these patches to go to your thermal-soc tree first. thanks, rui > 4 files changed, 104 insertions(+) > create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > create mode 100644 arch/arm/boot/dts/dra7-iva-thermal.dtsi > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
