Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> --- .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 40 +++++++++++++++++----- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt index b98e6f030da8..ca01710ee29a 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt @@ -34,13 +34,28 @@ Documentation/devicetree/bindings/mfd/syscon.txt Subnode Format ============== -The required properties of child nodes are (as defined in pinctrl-bindings): -- function -- groups +The required properties of pinmux child nodes are: +- function: the mux function to select +- groups : the list of groups to select with this function -Each function has only one associated pin group. Each group is named by its -function. The following values for the function and groups properties are -supported: +Required properties of pinconf child nodes are: +- groups: A list of groups to select (either this or "pins" must be + specified) +- pins : A list of ball names as strings, eg "D14" (either this or "groups" + must be specified) + +Optional properties of pinconf child nodes are: +- bias-disable : disable any pin bias +- bias-pull-down: pull down the pin +- drive-strength: sink or source at most X mA + +Definitions are as specified in +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any +further limitations as described above. + +For pinmux, each mux function has only one associated pin group. Each group is +named by its function. The following values for the function and groups +properties are supported: aspeed,ast2400-pinctrl, aspeed,g4-pinctrl: @@ -90,6 +105,11 @@ syscon: scu@1e6e2000 { function = "I2C3"; groups = "I2C3"; }; + + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A8"; + bias-disable; + }; }; }; @@ -110,6 +130,11 @@ ahb { function = "I2C3"; groups = "I2C3"; }; + + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A18"; + bias-disable; + }; }; }; @@ -143,6 +168,3 @@ ahb { }; }; }; - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices. -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html