Re: [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Mar 31, 2017 at 10:49 AM, Rafał Miłecki <rafal@xxxxxxxxxx> wrote:
> On 03/31/2017 04:23 PM, Jon Mason wrote:
>>
>> On Fri, Mar 31, 2017 at 3:03 AM, Rafał Miłecki <zajec5@xxxxxxxxx> wrote:
>>>
>>> On 03/24/2017 03:35 PM, Jon Mason wrote:
>>>>
>>>>
>>>> On Thu, Mar 23, 2017 at 11:30:45PM +0100, Rafał Miłecki wrote:
>>>>>
>>>>>
>>>>> diff --git a/drivers/thermal/broadcom/ns-thermal.c
>>>>> b/drivers/thermal/broadcom/ns-thermal.c
>>>>> new file mode 100644
>>>>> index 000000000000..acf3a4de62a4
>>>>> --- /dev/null
>>>>> +++ b/drivers/thermal/broadcom/ns-thermal.c
>>>>> @@ -0,0 +1,98 @@
>>>>> +/*
>>>>> + * Copyright (C) 2017 Rafał Miłecki <rafal@xxxxxxxxxx>
>>>>> + *
>>>>> + * This program is free software; you can redistribute it and/or
>>>>> modify
>>>>> + * it under the terms of the GNU General Public License version 2 as
>>>>> + * published by the Free Software Foundation.
>>>>> + */
>>>>> +
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/of_address.h>
>>>>> +#include <linux/platform_device.h>
>>>>> +#include <linux/thermal.h>
>>>>> +
>>>>> +#define PVTMON_CONTROL0                                        0x00
>>>>> +#define PVTMON_CONTROL0_SEL_MASK                       0x0000000e
>>>>> +#define PVTMON_CONTROL0_SEL_TEMP_MONITOR               0x00000000
>>>>> +#define PVTMON_CONTROL0_SEL_TEST_MODE                  0x0000000e
>>>>> +#define PVTMON_STATUS                                  0x08
>>>>> +
>>>>> +struct ns_thermal {
>>>>> +       void __iomem *pvtmon;
>>>>> +};
>>>>> +
>>>>> +static int ns_thermal_get_temp(void *data, int *temp)
>>>>> +{
>>>>> +       struct ns_thermal *ns_thermal = data;
>>>>> +       u32 val;
>>>>> +
>>>>> +       val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0);
>>>>> +       if ((val & PVTMON_CONTROL0_SEL_MASK) !=
>>>>> PVTMON_CONTROL0_SEL_TEMP_MONITOR) {
>>>>> +               val &= ~PVTMON_CONTROL0_SEL_MASK;
>>>>> +               val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR;
>>>>
>>>>
>>>>
>>>> I think this is slightly confusing here.  If this was off, ORing in 0
>>>> will not enable it.  I think we need to flip the #define to make it
>>>> PVTMON_CONTROL0_SEL_TEMP_MONITOR_DISABLE (or a less crappy name).
>>>> then use this line here to toggle it.  Something like
>>>>
>>>>                 val &= ~PVTMON_CONTROL0_SEL_TEMP_MONITOR_DISABLE;
>>>
>>>
>>>
>>> I don't understand this, can you help me further?
>>>
>>> OR-ing with 0 is only a cosmetic thing obviously - just to make it clear
>>> which
>>> value we expect to be set in bits 1:3. The important part is:
>>> val &= ~PVTMON_CONTROL0_SEL_MASK;
>>
>>
>> You are using a side effect of the masking to clear/enable the block.
>> I'm simply saying that we should be explicit about enabling it.  My
>> concern is that using the side effect hides what is being done and
>> could result in a bug somewhere down the line.  I think this is
>> improbable based on the code, but wanted to err on the side of
>> caution.
>
>
> Well, I'm clearing current mode selection and "selecting" the mode I want.
> By
> OR-ing PVTMON_CONTROL0_SEL_TEMP_MONITOR I'm clearly indicating I want temp
> monitor more.
>
> How else I could make it more obvious? Should I add some comment maybe?

I think it would be acceptable to remove the ORing of the 0, and
simply put a comment there that the masking of it is clearing the 0th
bit, thus enabling the IP block.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux