There's a typo, it should be GPIO176 and not GPIO106.
And it seems I messed up the regulators at some point while trying
to figure out what devices the regulators are used. The correct
regulator for MMC1 is vwlan2.
Fixes: 0d4cb3ccee58 ("ARM: dts: Configure regulators for droid 4")
Reported-by: Sebastian Reichel <sre@xxxxxxxxxx>
Reviewed-by: Sebastian Reichel <sre@xxxxxxxxxx>
Tested-by: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 2 +-
arch/arm/boot/dts/omap4-droid4-xt894.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -204,6 +204,7 @@
regulator-enable-ramp-delay = <1000>;
};
+ /* Used by micro-SDIO at mmc1 */
vwlan2: VWLAN2 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -216,7 +217,6 @@
regulator-enable-ramp-delay = <1000>;
};
- /* Used by micro-SDIO at mmc1 */
vsimcard: VSIMCARD {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -278,9 +278,9 @@
};
&mmc1 {
- vmmc-supply = <&vsimcard>;
+ vmmc-supply = <&vwlan2>;
bus-width = <4>;
- cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
};
&mmc2 {
--
2.12.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
