This patch adds a new header :spi-nor.h, and copies all the SPI NOR commands and relative macros into this new header. This hearder can be used by the m25p80.c and other spi-nor controller, such as Freescale's Quadspi. Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx> --- include/linux/mtd/spi-nor.h | 53 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 53 insertions(+), 0 deletions(-) create mode 100644 include/linux/mtd/spi-nor.h diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h new file mode 100644 index 0000000..ab2ea1e --- /dev/null +++ b/include/linux/mtd/spi-nor.h @@ -0,0 +1,53 @@ +#ifndef __LINUX_MTD_SPI_NOR_H +#define __LINUX_MTD_SPI_NOR_H + +/* Flash opcodes. */ +#define OPCODE_WREN 0x06 /* Write enable */ +#define OPCODE_RDSR 0x05 /* Read status register */ +#define OPCODE_WRSR 0x01 /* Write status register 1 byte */ +#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ +#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ +#define OPCODE_QUAD_READ 0x6b /* Read data bytes */ +#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ +#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ +#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ +#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ +#define OPCODE_RDCR 0x35 /* Read configuration register */ + +/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ +#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */ +#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ +#define OPCODE_QUAD_READ_4B 0x6c /* Read data bytes */ +#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */ +#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */ + +/* Used for SST flashes only. */ +#define OPCODE_BP 0x02 /* Byte program */ +#define OPCODE_WRDI 0x04 /* Write disable */ +#define OPCODE_AAI_WP 0xad /* Auto address increment word program */ + +/* Used for Macronix and Winbond flashes. */ +#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ +#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ + +/* Used for Spansion flashes only. */ +#define OPCODE_BRWR 0x17 /* Bank register write */ + +/* Status Register bits. */ +#define SR_WIP 1 /* Write in progress */ +#define SR_WEL 2 /* Write enable latch */ +/* meaning of other SR_* bits may differ between vendors */ +#define SR_BP0 4 /* Block protect 0 */ +#define SR_BP1 8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ + +#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ + +/* Configuration Register bits. */ +#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ + +#endif -- 1.7.2.rc3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
