Hello!
Second round for Maxim max9611/max9612 high-side current sense amplifier driver.
For reference, a simplified integration schematic drawing is here reported:
----o----/\/\/-----o-------|LOAD|---
| shunt |
____|______________|___
| RS+ RS- |
| |-----gain-----| |
| | |
| | |
|max9611 |->| ADC |===== I2c
|______________________|
public datasheet available at
https://datasheets.maximintegrated.com/en/ds/MAX9611-MAX9612.pdf
Compared to v1, all channels whose values are calculated using parameters
depending on the applied gain have been transformed in "processed" channels.
Gain selection procedure is performed in kernel space, and gain-dependent
values (current sense amplifier gain and offset) are not exposed to userspace
anymore.
output reported from iio_info tool:
iio:device0: max9611_vdd
6 channels found:
voltage0: (input)
1 channel-specific attributes found:
attr 0: input value: 4.085000000
voltage1: (input)
3 channel-specific attributes found:
attr 0: scale value: 14
attr 1: offset value: 1
attr 2: raw value: 59
shunt: (input)
2 channel-specific attributes found:
attr 0: resistor_power value: 5000
attr 1: resistor_current value: 5000
power: (input)
1 channel-specific attributes found:
attr 0: input value: 663.404000000
temp: (input)
2 channel-specific attributes found:
attr 0: scale value: 0.480076812
attr 1: raw value: 59
current: (input)
1 channel-specific attributes found:
attr 0: input value: 817.000000000
Tested on Salvator-X M3-W board.
Thanks
j
v1 -> v2:
- Drop wildcard (max961x) in driver, documentation and dt-bindings. Use
max9611 instead.
- Make 3 processed channels for csa voltage, csa current and power load
- Remove wrapper functions around i2c buffer access
- Add locking in read_raw()
- Make 2 separate attributes for shunt resistor: current and power
- Renamed shunt resistor attribute
- Fixed several review comments
Jacopo Mondi (4):
Documentation: dt-bindings: iio: Add max9611 ADC
iio: Documentation: Add max9611 sysfs documentation
iio: adc: Add Maxim max9611 ADC driver
arm64: dts: salvator-x: Add current sense amplifiers
.../ABI/testing/sysfs-bus-iio-adc-max9611 | 16 +
.../devicetree/bindings/iio/adc/max9611.txt | 27 +
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 18 +
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/max9611.c | 590 +++++++++++++++++++++
6 files changed, 662 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
create mode 100644 Documentation/devicetree/bindings/iio/adc/max9611.txt
create mode 100644 drivers/iio/adc/max9611.c
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
