From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
---
.../devicetree/bindings/iio/adc/ltc2497.txt | 13 +
MAINTAINERS | 1 +
drivers/iio/adc/Kconfig | 11 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ltc2497.c | 263 +++++++++++++++++++++
5 files changed, 289 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ltc2497.txt
create mode 100644 drivers/iio/adc/ltc2497.c
diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
new file mode 100644
index 0000000..c2829c19
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
@@ -0,0 +1,13 @@
+* Linear Technology / Analog Devices LTC2497 ADC
+
+Required properties:
+ - compatible: Should be "lltc,ltc2497"
+ - reg: Should contain the ADC I2C address
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+ ltc2497: adc@76 {
+ compatible = "lltc,ltc2497";
+ reg = <0x76>;
+ vref-supply = <<c2497_reg>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a7d6f9a..173043c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -813,6 +813,7 @@ W: http://wiki.analog.com/
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/*/ad*
+F: drivers/iio/adc/ltc2497*
X: drivers/iio/*/adjd*
F: drivers/staging/iio/*/ad*
F: drivers/staging/iio/trigger/iio-trig-bfin-timer.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 2268a6f..141cf4a 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -326,6 +326,17 @@ config LTC2485
To compile this driver as a module, choose M here: the module will be
called ltc2485.
+config LTC2497
+ tristate "Linear Technology LTC2497 ADC driver"
+ depends on I2C
+ help
+ Say yes here to build support for Linear Technology LTC2497
+ 16-Bit 8-/16-Channel Delta Sigma ADC.
+ Provides direct access via sysfs
+
+ To compile this driver as a module, choose M here: the module will be
+ called ltc2497.
+
config MAX1027
tristate "Maxim max1027 ADC driver"
depends on SPI
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 73dbe39..9d626b5 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
obj-$(CONFIG_LTC2485) += ltc2485.o
+obj-$(CONFIG_LTC2497) += ltc2497.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX11100) += max11100.o
obj-$(CONFIG_MAX1363) += max1363.o
diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c
new file mode 100644
index 0000000..0452715
--- /dev/null
+++ b/drivers/iio/adc/ltc2497.c
@@ -0,0 +1,263 @@
+/*
+ * ltc2497.c - Driver for Linear Technology LTC2497 ADC
+ *
+ * Copyright (C) 2017 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ *
+ * Datasheet: http://cds.linear.com/docs/en/datasheet/2497fd.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define LTC2497_ENABLE 0xA0
+#define LTC2497_SGL (1 << 4)
+#define LTC2497_DIFF (0 << 4)
+#define LTC2497_SIGN (1 << 3)
+#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE
+#define LTC2497_CONVERSION_TIME_MS 150ULL
+
+struct ltc2497_st {
+ struct i2c_client *client;
+ struct regulator *ref;
+ ktime_t time_prev;
+ u8 addr_prev;
+};
+
+static int ltc2497_wait_conv(struct ltc2497_st *st)
+{
+ s64 time_elapsed;
+
+ time_elapsed = ktime_ms_delta(ktime_get(), st->time_prev);
+
+ if (time_elapsed < LTC2497_CONVERSION_TIME_MS) {
+ /* delay if conversion time not passed
+ * since last read or write
+ */
+ msleep(LTC2497_CONVERSION_TIME_MS - time_elapsed);
+ return 0;
+ }
+
+ if (time_elapsed - LTC2497_CONVERSION_TIME_MS <= 0) {
+ /* We're in automatic mode -
+ * so the last reading is stil not outdated
+ */
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int ltc2497_read(struct ltc2497_st *st, u8 address, int *val)
+{
+ struct i2c_client *client = st->client;
+ __be32 buf = 0;
+ int ret;
+
+ ret = ltc2497_wait_conv(st);
+ if (ret < 0 || st->addr_prev != address) {
+ ret = i2c_smbus_write_byte(st->client, 0xA0 | address);
+ if (ret < 0)
+ return ret;
+ st->addr_prev = address;
+ msleep(LTC2497_CONVERSION_TIME_MS);
+ }
+ ret = i2c_master_recv(client, (char *)&buf, 3);
+ if (ret < 0) {
+ dev_err(&client->dev, "i2c_master_recv failed\n");
+ return ret;
+ }
+ st->time_prev = ktime_get();
+ *val = (be32_to_cpu(buf) >> 14) - (1 << 17);
+
+ return ret;
+}
+
+static int ltc2497_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct ltc2497_st *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ ret = ltc2497_read(st, chan->address, val);
+ mutex_unlock(&indio_dev->mlock);
+ if (ret < 0)
+ return ret;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ ret = regulator_get_voltage(st->ref);
+ if (ret < 0)
+ return ret;
+
+ *val = ret / 1000;
+ *val2 = 17;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+#define LTC2497_CHAN(_chan, _addr) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan), \
+ .address = (_addr | (_chan / 2) | ((_chan & 1) ? LTC2497_SIGN : 0)), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+#define LTC2497_CHAN_DIFF(_chan, _addr) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 1 : 0), \
+ .channel2 = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 0 : 1),\
+ .address = (_addr | _chan), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .differential = 1, \
+}
+
+static const struct iio_chan_spec ltc2497_channel[] = {
+ LTC2497_CHAN(0, LTC2497_SGL),
+ LTC2497_CHAN(1, LTC2497_SGL),
+ LTC2497_CHAN(2, LTC2497_SGL),
+ LTC2497_CHAN(3, LTC2497_SGL),
+ LTC2497_CHAN(4, LTC2497_SGL),
+ LTC2497_CHAN(5, LTC2497_SGL),
+ LTC2497_CHAN(6, LTC2497_SGL),
+ LTC2497_CHAN(7, LTC2497_SGL),
+ LTC2497_CHAN(8, LTC2497_SGL),
+ LTC2497_CHAN(9, LTC2497_SGL),
+ LTC2497_CHAN(10, LTC2497_SGL),
+ LTC2497_CHAN(11, LTC2497_SGL),
+ LTC2497_CHAN(12, LTC2497_SGL),
+ LTC2497_CHAN(13, LTC2497_SGL),
+ LTC2497_CHAN(14, LTC2497_SGL),
+ LTC2497_CHAN(15, LTC2497_SGL),
+ LTC2497_CHAN_DIFF(0, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(1, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(2, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(3, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(4, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(5, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(6, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(7, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(0, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(1, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(2, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(3, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(4, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(5, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(6, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(7, LTC2497_DIFF | LTC2497_SIGN),
+};
+
+static const struct iio_info ltc2497_info = {
+ .read_raw = ltc2497_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int ltc2497_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct ltc2497_st *st;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_WRITE_BYTE))
+ return -EOPNOTSUPP;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ st->client = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = id->name;
+ indio_dev->info = <c2497_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ltc2497_channel;
+ indio_dev->num_channels = ARRAY_SIZE(ltc2497_channel);
+
+ st->ref = devm_regulator_get(&client->dev, "vref");
+ if (IS_ERR(st->ref))
+ return PTR_ERR(st->ref);
+
+ ret = regulator_enable(st->ref);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte(st->client, LTC2497_CONFIG_DEFAULT);
+ if (ret < 0)
+ goto err_regulator_disable;
+
+ st->addr_prev = LTC2497_CONFIG_DEFAULT;
+ st->time_prev = ktime_get();
+
+ ret = devm_iio_device_register(&client->dev, indio_dev);
+ if (ret < 0)
+ goto err_regulator_disable;
+
+ return 0;
+
+err_regulator_disable:
+ regulator_disable(st->ref);
+
+ return ret;
+}
+
+static int ltc2497_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ltc2497_st *st = iio_priv(indio_dev);
+
+ regulator_disable(st->ref);
+
+ return 0;
+}
+
+static const struct i2c_device_id ltc2497_id[] = {
+ { "ltc2497", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ltc2497_id);
+
+static const struct of_device_id ltc2497_of_match[] = {
+ { .compatible = "lltc,ltc2497", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ltc2497_of_match);
+
+static struct i2c_driver ltc2497_driver = {
+ .driver = {
+ .name = "ltc2497",
+ .of_match_table = of_match_ptr(ltc2497_of_match),
+ },
+ .probe = ltc2497_probe,
+ .remove = ltc2497_remove,
+ .id_table = ltc2497_id,
+};
+module_i2c_driver(ltc2497_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Linear Technology LTC2497 ADC driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
