DTS properties are used instead of fixed data because PHY settings can be different for different chips/boards. Add description of new DLL PHY delays. Signed-off-by: Piotr Sroka <piotrs@xxxxxxxxxxx> --- Changes for v2: - file was created in v2. It was a part of driver source file patch. - most delays were moved from dts file to data associated with an SoC specific compatible - description of delays was updated to be more clearly --- Changes for v3: - move all delays back to dts because they are also boards dependent - prefix all of the Cadence-specific properties with cdns prefix --- Changes for v4: - change the beginning of the commit subject --- .../devicetree/bindings/mmc/sdhci-cadence.txt | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt index c0f37cb..c341820 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt @@ -19,6 +19,53 @@ if supported. See mmc.txt for details. - mmc-hs400-1_8v - mmc-hs400-1_2v +Some PHY delays can be configured by following properties. +PHY DLL input delays: +They are used to delay the data valid window, and align the window +to sampling clock. The delay starts from 5ns (for delay parameter equal to 0) +and it is increased by 2.5ns in each step. +- cdns,phy-input-delay-sd-highspeed: + Value of the delay in the input path for SD high-speed timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-legacy: + Value of the delay in the input path for SD legacy timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr12: + Value of the delay in the input path for SD UHS SDR12 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr25: + Value of the delay in the input path for SD UHS SDR25 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr50: + Value of the delay in the input path for SD UHS SDR50 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-ddr50: + Value of the delay in the input path for SD UHS DDR50 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-mmc-highspeed: + Value of the delay in the input path for MMC high-speed timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-mmc-ddr: + Value of the delay in the input path for eMMC high-speed DDR timing + Valid range = [0:0x1F]. + +PHY DLL clock delays: +Each delay property represents the fraction of the clock period. +The approximate delay value will be +(<delay property value>/128)*sdmclk_clock_period. +- cdns,phy-dll-delay-sdclk: + Value of the delay introduced on the sdclk output + for all modes except HS200, HS400 and HS400_ES. + Valid range = [0:0x7F]. +- cdns,phy-dll-delay-sdclk-hsmmc: + Value of the delay introduced on the sdclk output + for HS200, HS400 and HS400_ES speed modes. + Valid range = [0:0x7F]. +- cdns,phy-dll-delay-strobe: + Value of the delay introduced on the dat_strobe input + used in HS400 / HS400_ES speed modes. + Valid range = [0:0x7F]. + Example: emmc: sdhci@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; @@ -29,4 +76,5 @@ Example: mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; + cdns,phy-dll-delay-sdclk = <0>; }; -- 2.2.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html