On Sat, Mar 18, 2017 at 12:58:27PM -0700, Steve Longerbeam wrote: > On 03/18/2017 12:22 PM, Russell King - ARM Linux wrote: > >0:00:01.955927879 20954 0x15ffe90 INFO v4l2 gstv4l2object.c:3811:gst_v4l2_object_get_caps:<v4l2src0> probed caps: video/x-bayer, format=(string)rggb, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)I420, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)YV12, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)BGR, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; video/x-raw, format=(string)RGB, framerate=(fraction)30000/1001, width=(int)816, height=(int)616, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1 > > > > despite the media pipeline actually being configured for 60fps. > > > > Forcing it by adjusting the pipeline only results in gstreamer > > failing, because it believes that v4l2 is unable to operate at > > 60fps. > > > > Also note the complaints from v4l2src about the non-compliance... > > Thanks, I've fixed most of v4l2-compliance issues, but this is not > done yet. Is that something you can help with? I've looked at this, and IMHO it's yet another media control API mess. - media-ctl itself allows setting the format on subdev pads via struct v4l2_subdev_format. - struct v4l2_subdev_format contains a struct v4l2_mbus_framefmt. - struct v4l2_mbus_framefmt contains: * @width: frame width * @height: frame height * @code: data format code (from enum v4l2_mbus_pixelcode) * @field: used interlacing type (from enum v4l2_field) * @colorspace: colorspace of the data (from enum v4l2_colorspace) * @ycbcr_enc: YCbCr encoding of the data (from enum v4l2_ycbcr_encoding) * @quantization: quantization of the data (from enum v4l2_quantization) * @xfer_func: transfer function of the data (from enum v4l2_xfer_func) - media-ctl sets width, height, code and field, but nothing else. We're already agreed that the fields that media-ctl are part of the format negotiation between the ultimate source, flowing down to the capture device. However, there's no support in media-ctl to deal with these other fields - so media-ctl in itself is only half- implemented. >From what I can tell, _we_ are doing the right thing in imx-media-capture. However, I think part of the problem is the set_fmt implementation. When a source pad is configured via set_fmt(), any fields that can not be altered (eg, because the subdev doesn't support colorspace conversion) need to be preserved from the subdev's sink pad. Right now, CSI doesn't do that - it only looks at the width, height, code, and field. I think we've got other bugs though that haven't been picked up by any review - csi_try_fmt() adjusts the format using the _current_ configuration of the sink pad, even when using V4L2_SUBDEV_FORMAT_TRY. This seems wrong according to the docs: the purpose of the try mechanism is to be able to setup the _entire_ pipeline using the TRY mechanism to work out whether the configuration works, before then setting for real. If we're validating the TRY formats against the live configuration, then we're not doing that. There's calls for: v4l2_subdev_get_try_format v4l2_subdev_get_try_crop v4l2_subdev_get_try_compose to get the try configuration - we hardly make use of all of these. I would suggest that we change the approach to implementing the various subdevs such that: 1) like __csi_get_fmt(), we have accessors that gets a pointer to the correct state for the TRY/live settings. 2) everywhere we're asked to get or set parameters that can be TRY/live, we use these accessors to retrieve a pointer to the correct state to not only read, but also modify. 3) when we're evaluating parameters against another pad, we use these accessors to obtain the other pad's configuration, rather than poking about in the state saved in the subdev's priv-> (which is irrelevant for the TRY variant.) 4) ensure that all parameters which the subdev itself does not support modification of are correctly propagated from the sink pad to all source pads, and are unable to be modified via the source pad. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
