The CPU port of the BCM53125 is configured with RGMII (no delays) but this should actually be RGMII with transmit delay (rgmii-txid) because STMMAC takes care of inserting the transmitter delay. This fixes occasional packet loss encountered. Fixes: d7b9eaff5f0c ("ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board") Reported-by: Hartmut Knaack <knaack.h@xxxxxx> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 72ec0d5ae052..bbf1c8cbaac6 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -167,7 +167,7 @@ reg = <8>; label = "cpu"; ethernet = <&gmac>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; fixed-link { speed = <1000>; full-duplex; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html