On 03/17/2017 05:33 PM, Hans Verkuil wrote:
Add support for the image renderer light SRAM extended 3 (IMR-LSX3) found
only in the R-Car V2H (R8A7792) SoC. It differs from IMR-LX4 in that it
supports only planar video formats but can use the video capture data for
the textures.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
[...]
Index: media_tree/drivers/media/platform/rcar_imr.c
===================================================================
--- media_tree.orig/drivers/media/platform/rcar_imr.c
+++ media_tree/drivers/media/platform/rcar_imr.c
[...]
@@ -282,6 +296,34 @@ static u32 __imr_flags_common(u32 iflags
return iflags & oflags & IMR_F_PLANES_MASK;
}
+static const struct imr_format_info imr_lsx3_formats[] = {
+ {
+ .name = "YUV 4:2:2 semiplanar (NV16)",
+ .fourcc = V4L2_PIX_FMT_NV16,
+ .flags = IMR_F_Y8 | IMR_F_UV8 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Greyscale 8-bit",
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .flags = IMR_F_Y8 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Greyscale 10-bit",
+ .fourcc = V4L2_PIX_FMT_Y10,
+ .flags = IMR_F_Y8 | IMR_F_Y10 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Greyscale 12-bit",
+ .fourcc = V4L2_PIX_FMT_Y12,
+ .flags = IMR_F_Y8 | IMR_F_Y10 | IMR_F_Y12 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Chrominance UV 8-bit",
+ .fourcc = V4L2_PIX_FMT_UV8,
+ .flags = IMR_F_UV8 | IMR_F_PLANAR,
+ },
+};
+
static const struct imr_format_info imr_lx4_formats[] = {
{
.name = "YUV 4:2:2 semiplanar (NV16)",
@@ -335,6 +377,18 @@ static const struct imr_format_info imr_
},
};
+static const struct imr_info imr_lsx3 = {
+ .type = IMR_LSX3,
+ .formats = imr_lsx3_formats,
+ .num_formats = ARRAY_SIZE(imr_lsx3_formats),
+};
+
+static const struct imr_info imr_lx4 = {
+ .type = IMR_LX4,
+ .formats = imr_lx4_formats,
+ .num_formats = ARRAY_SIZE(imr_lx4_formats),
+};
+
/* mesh configuration constructor */
static struct imr_cfg *imr_cfg_create(struct imr_ctx *ctx,
u32 dl_size, u32 dl_start)
[...]
@@ -823,7 +879,7 @@ static void imr_dl_program_setup(struct
*dl++ = IMR_OP_WTS(IMR_SSTR,
w << (iflags & IMR_F_UV10 ? 1 : 0));
}
- } else {
+ } else if (ctx->imr->info->type == IMR_LX4) {
u16 src_fmt = (iflags & IMR_F_UV_SWAP ? IMR_CMRCR2_UVFORM : 0) |
(iflags & IMR_F_YUV_SWAP ?
IMR_CMRCR2_YUV422FORM : 0);
@@ -864,6 +920,9 @@ static void imr_dl_program_setup(struct
*dl++ = IMR_OP_WTS(IMR_DSTR,
W << (cflags & IMR_F_Y10 ? 2 : 1));
}
+ } else {
+ /* this shouldn't happen! */
+ BUG();
Can you find a better way? The use of 'BUG' is frowned upon. It's better
to return an error here.
OK, I'll try to return -EINVAL here...
BTW, the main driver patch also has BUG_ON()...
Also, are you sure this can't happen? At least for
> me it is not obvious from the code.
Absolutely. Interleaved formats are not supported by IMR-L[S]X3, so the
format array has IMR_F_PLANAR set for all formats supported by these cores.
Interleaved formats are onlt supported by IMR-LX4 (for which we check above).
[...]
Regards,
Hans
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
