DTS properties are used instead of fixed data
because PHY settings can be different for different chips/boards.
Add description of new DLL PHY delays.
Signed-off-by: Piotr Sroka <piotrs@xxxxxxxxxxx>
---
Changes for v2:
- file was created in v2. It was a part of driver source file patch.
- most delays were moved from dts file
to data associated with an SoC specific compatible
- description of delays was updated to be more clearly
---
Changes for v3:
- move all delays back to dts because they are also boards dependent
- prefix all of the Cadence-specific properties with cdns prefix
---
.../devicetree/bindings/mmc/sdhci-cadence.txt | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
index c0f37cb..c341820 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
@@ -19,6 +19,53 @@ if supported. See mmc.txt for details.
- mmc-hs400-1_8v
- mmc-hs400-1_2v
+Some PHY delays can be configured by following properties.
+PHY DLL input delays:
+They are used to delay the data valid window, and align the window
+to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+and it is increased by 2.5ns in each step.
+- cdns,phy-input-delay-sd-highspeed:
+ Value of the delay in the input path for SD high-speed timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-legacy:
+ Value of the delay in the input path for SD legacy timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr12:
+ Value of the delay in the input path for SD UHS SDR12 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr25:
+ Value of the delay in the input path for SD UHS SDR25 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr50:
+ Value of the delay in the input path for SD UHS SDR50 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-ddr50:
+ Value of the delay in the input path for SD UHS DDR50 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-mmc-highspeed:
+ Value of the delay in the input path for MMC high-speed timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-mmc-ddr:
+ Value of the delay in the input path for eMMC high-speed DDR timing
+ Valid range = [0:0x1F].
+
+PHY DLL clock delays:
+Each delay property represents the fraction of the clock period.
+The approximate delay value will be
+(<delay property value>/128)*sdmclk_clock_period.
+- cdns,phy-dll-delay-sdclk:
+ Value of the delay introduced on the sdclk output
+ for all modes except HS200, HS400 and HS400_ES.
+ Valid range = [0:0x7F].
+- cdns,phy-dll-delay-sdclk-hsmmc:
+ Value of the delay introduced on the sdclk output
+ for HS200, HS400 and HS400_ES speed modes.
+ Valid range = [0:0x7F].
+- cdns,phy-dll-delay-strobe:
+ Value of the delay introduced on the dat_strobe input
+ used in HS400 / HS400_ES speed modes.
+ Valid range = [0:0x7F].
+
Example:
emmc: sdhci@5a000000 {
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
@@ -29,4 +76,5 @@ Example:
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ cdns,phy-dll-delay-sdclk = <0>;
};
--
2.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
