On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
has ADCs that are used for battery charging and USB PHY VBUS and ID pin
detection.
Unfortunately the only documentation for this ADC seems to be the
Motorola mapphone Linux kernel tree. I have tested that reading raw and
scaled values works, but I have not used the timed sampling that the ADC
seems to support.
Let's add a minimal support for it so we can eventually provide IIO
channels for the related battery charging and USB PHY drivers.
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Marcel Partap <mpartap@xxxxxxx>
Cc: Michael Scott <michael.scott@xxxxxxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgrne <tony@xxxxxxxxxxx>
---
.../devicetree/bindings/iio/adc/cpcap-adc.txt | 16 +
drivers/iio/adc/Kconfig | 11 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/cpcap-adc.c | 997 +++++++++++++++++++++
4 files changed, 1025 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
create mode 100644 drivers/iio/adc/cpcap-adc.c
diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
new file mode 100644
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
@@ -0,0 +1,16 @@
+Motorola CPCAP PMIC ADC binding
+
+Required properties:
+- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
+- interrupts: The interrupt number for the ADC device
+- interrupt-names: Should be "adcdone"
+- #io-channel-cells: Number of cells in an IIO specifier
+
+Example:
+
+cpcap_adc: adc {
+ compatible = "motorola,mapphone-cpcap-adc";
+ interrupts-extended = <&cpcap 8 0>;
+ interrupt-names = "adcdone";
+ #io-channel-cells = <1>;
+};
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -195,6 +195,17 @@ config CC10001_ADC
This driver can also be built as a module. If so, the module will be
called cc10001_adc.
+config CPCAP_ADC
+ tristate "Motorola CPCAP PMIC ADC driver"
+ depends on MFD_CPCAP
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Motorola CPCAP PMIC ADC.
+
+ This driver can also be built as a module. If so, the module will be
+ called cpcap-adc.
+
config DA9150_GPADC
tristate "Dialog DA9150 GPADC driver support"
depends on MFD_DA9150
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o
obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
+obj-$(CONFIG_CPCAP_ADC) += cpcap-adc.o
obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c
new file mode 100644
--- /dev/null
+++ b/drivers/iio/adc/cpcap-adc.c
@@ -0,0 +1,997 @@
+/*
+ * Copyright (C) 2017 Tony Lindgren <tony@xxxxxxxxxxx>
+ *
+ * Rewritten for Linux IIO framework with register managing functions
+ * based on earlier driver found in the Motorola Linux kernel:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/* Register CPCAP_REG_ADCC1 bits */
+#define CPCAP_BIT_ADEN_AUTO_CLR BIT(15) /* Currently unused */
+#define CPCAP_BIT_CAL_MODE BIT(14) /* Set with BIT_RAND0 */
+#define CPCAP_BIT_ADC_CLK_SEL1 BIT(13) /* Currently unused */
+#define CPCAP_BIT_ADC_CLK_SEL0 BIT(12) /* Currently unused */
+#define CPCAP_BIT_ATOX BIT(11) /* in/out ps factor */
+#define CPCAP_BIT_ATO3 BIT(10)
+#define CPCAP_BIT_ATO2 BIT(9)
+#define CPCAP_BIT_ATO1 BIT(8)
+#define CPCAP_BIT_ATO0 BIT(7)
+#define CPCAP_BIT_ADA2 BIT(6)
+#define CPCAP_BIT_ADA1 BIT(5)
+#define CPCAP_BIT_ADA0 BIT(4)
+#define CPCAP_BIT_AD_SEL1 BIT(3) /* Set for ADC_TYPE_BANK_1 */
+#define CPCAP_BIT_RAND1 BIT(2) /* Set for ADC_TYPE_BATT_PI */
+#define CPCAP_BIT_RAND0 BIT(1) /* Set with CAL_MODE */
+#define CPCAP_BIT_ADEN BIT(0) /* Currently unused */
+
+/* Register CPCAP_REG_ADCC2 bits */
+#define CPCAP_BIT_CAL_FACTOR_ENABLE BIT(15) /* Currently unused */
+#define CPCAP_BIT_BATDETB_EN BIT(14) /* Currently unused */
+#define CPCAP_BIT_ADTRIG_ONESHOT BIT(13) /* Set for !TIMING_IMM */
+#define CPCAP_BIT_ASC BIT(12) /* Set for TIMING_IMM */
+#define CPCAP_BIT_ATOX_PS_FACTOR BIT(11) /* in/out ps factor */
+#define CPCAP_BIT_ADC_PS_FACTOR1 BIT(10) /* in/out ps factor */
+#define CPCAP_BIT_ADC_PS_FACTOR0 BIT(9) /* in/out ps factor */
+#define CPCAP_BIT_AD4_SELECT BIT(8) /* Currently unused */
+#define CPCAP_BIT_ADC_BUSY BIT(7) /* Currently unused */
+#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Currently unused */
+#define CPCAP_BIT_ADTRIG_DIS BIT(5) /* Disable interrupt */
+#define CPCAP_BIT_LIADC BIT(4) /* Currently unused */
+#define CPCAP_BIT_TS_REFEN BIT(3) /* Currently unused */
+#define CPCAP_BIT_TS_M2 BIT(2) /* Currently unused */
+#define CPCAP_BIT_TS_M1 BIT(1) /* Currently unused */
+#define CPCAP_BIT_TS_M0 BIT(0) /* Currently unused */
+
+#define MAX_TEMP_LVL 27
+#define FOUR_POINT_TWO_ADC 801
+#define ST_ADC_CAL_CHRGI_UPPER_THRESHOLD 530
+#define ST_ADC_CAL_CHRGI_LOWER_THRESHOLD 494
+#define ST_ADC_CAL_BATTI_UPPER_THRESHOLD 530
+#define ST_ADC_CAL_BATTI_LOWER_THRESHOLD 494
+#define ST_ADC_CALIBRATE_DIFF_THRESHOLD 3
+
+/**
+ * struct cpcap_adc_ato - timing settings for cpcap adc
+ *
+ * Unfortunately no cpcap documentation available, please document when
+ * using these.
+ */
+struct cpcap_adc_ato {
+ unsigned short ato_in;
+ unsigned short atox_in;
+ unsigned short adc_ps_factor_in;
+ unsigned short atox_ps_factor_in;
+ unsigned short ato_out;
+ unsigned short atox_out;
+ unsigned short adc_ps_factor_out;
+ unsigned short atox_ps_factor_out;
+};
+
+/**
+ * struct cpcap-adc - cpcap adc device driver data
+ * @reg: cpcap regmap
+ * @dev: struct device
+ * @vendor: cpcap vendor
+ * @irq: interrupt
+ * @lock: mutex
+ * @ato: request timings
+ * @wq_data_avail: work queue
+ * @done: work done
+ */
+struct cpcap_adc {
+ struct regmap *reg;
+ struct device *dev;
+ u16 vendor;
+ int irq;
+ struct mutex lock; /* ADC register access lock */
+ const struct cpcap_adc_ato *ato;
+ wait_queue_head_t wq_data_avail;
+ bool done;
+};
+
+/**
+ * enum cpcap_adc_bank0 - cpcap adc bank0 channels
+ */
+enum cpcap_adc_bank0 {
+ CPCAP_ADC_AD0_BATTDETB,
+ CPCAP_ADC_BATTP,
+ CPCAP_ADC_VBUS,
+ CPCAP_ADC_AD3,
+ CPCAP_ADC_BPLUS_AD4,
+ CPCAP_ADC_CHG_ISENSE,
+ CPCAP_ADC_BATTI_ADC,
+ CPCAP_ADC_USB_ID,
+ CPCAP_ADC_BANK0_NUM,
+};
+
+/**
+ * enum cpcap_adc_bank1 - cpcap adc bank1 channels
+ */
+enum cpcap_adc_bank1 {
+ CPCAP_ADC_AD8,
+ CPCAP_ADC_AD9,
+ CPCAP_ADC_LICELL,
+ CPCAP_ADC_HV_BATTP,
+ CPCAP_ADC_TSX1_AD12,
+ CPCAP_ADC_TSX2_AD13,
+ CPCAP_ADC_TSY1_AD14,
+ CPCAP_ADC_TSY2_AD15,
+ CPCAP_ADC_BANK1_NUM,
+};
+
+/**
+ * enum cpcap_adc_timing - cpcap adc timing options
+ *
+ * CPCAP_ADC_TIMING_IMM seems to be immediate with no timings.
+ * Please document when using.
+ */
+enum cpcap_adc_timing {
+ CPCAP_ADC_TIMING_IMM,
+ CPCAP_ADC_TIMING_IN,
+ CPCAP_ADC_TIMING_OUT,
+};
+
+/**
+ * enum cpcap_adc_type - cpcap adc types
+ *
+ * Two banks of channels with eight channels in each. The first two channels
+ * in bank0 can be muxed for other functionality with CPCAP_ADC_TYPE_BATT_PI.
+ */
+enum cpcap_adc_type {
+ CPCAP_ADC_TYPE_BANK_0,
+ CPCAP_ADC_TYPE_BANK_1,
+ CPCAP_ADC_TYPE_BATT_PI,
+};
+
+/**
+ * struct cpcap_adc_request - cpcap adc request
+ * @timing: timing settings
+ * @type: bank type, bank0, 1 or remuxed bank0
+ * @result: result array
+ */
+struct cpcap_adc_request {
+ enum cpcap_adc_timing timing;
+ enum cpcap_adc_type type;
+ int result[CPCAP_ADC_BANK0_NUM];
+};
+
+/**
+ * struct cpcap_adc_phasing_tbl - cpcap phasing table
+ * @offset: offset in the phasing table
+ * @multiplier: multiplier in the phasing table
+ * @divider: divider in the phasing table
+ * @min: minimum value
+ * @max: maximum value
+ */
+struct cpcap_adc_phasing_tbl {
+ short offset;
+ unsigned short multiplier;
+ unsigned short divider;
+ short min;
+ short max;
+};
+
+/**
+ * enum cpcap_adc_conv_type - cpcap conversion types
+ */
+enum cpcap_adc_conv_type {
+ CONV_TYPE_NONE,
+ CONV_TYPE_DIRECT,
+ CONV_TYPE_MAPPING,
+};
+
+/**
+ * struct cpcap_adc_conversion_tbl - cpcap conversion table
+ * @conv_type: conversion type
+ * @align_offset: align offset
+ * @conv_offset: conversion offset
+ * @cal_offset: calibration offset
+ * @multiplier: conversion multiplier
+ * @divider: conversion divider
+ */
+struct cpcap_adc_conversion_tbl {
+ enum cpcap_adc_conv_type conv_type;
+ int align_offset;
+ int conv_offset;
+ int cal_offset;
+ int multiplier;
+ int divider;
+};
+
+/* Phasing table for bank0 */
+static struct cpcap_adc_phasing_tbl bank0_phasing[CPCAP_ADC_BANK0_NUM] = {
+ [CPCAP_ADC_AD0_BATTDETB] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_BATTP] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_VBUS] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_AD3] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_BPLUS_AD4] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_CHG_ISENSE] = {0, 0x80, 0x80, -512, 511},
+ [CPCAP_ADC_BATTI_ADC] = {0, 0x80, 0x80, -512, 511},
+ [CPCAP_ADC_USB_ID] = {0, 0x80, 0x80, 0, 1023},
+};
+
+/* Phasing table for bank1 */
+static struct cpcap_adc_phasing_tbl bank1_phasing[CPCAP_ADC_BANK1_NUM] = {
+ [CPCAP_ADC_AD8] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_AD9] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_LICELL] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_HV_BATTP] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_TSX1_AD12] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_TSX2_AD13] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_TSY1_AD14] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_TSY2_AD15] = {0, 0x80, 0x80, 0, 1023},
+};
+
+/* Conversion table for bank0 */
+static struct cpcap_adc_conversion_tbl bank0_conversion[CPCAP_ADC_BANK0_NUM] = {
+ [CPCAP_ADC_AD0_BATTDETB] = {
+ CONV_TYPE_MAPPING, 0, 0, 0, 1, 1,
+ },
+ [CPCAP_ADC_BATTP] = {
+ CONV_TYPE_DIRECT, 0, 2400, 0, 2300, 1023,
+ },
+ [CPCAP_ADC_VBUS] = {
+ CONV_TYPE_DIRECT, 0, 0, 0, 10000, 1023,
+ },
+ [CPCAP_ADC_AD3] = {
+ CONV_TYPE_MAPPING, 0, 0, 0, 1, 1,
+ },
+ [CPCAP_ADC_BPLUS_AD4] = {
+ CONV_TYPE_DIRECT, 0, 2400, 0, 2300, 1023,
+ },
+ [CPCAP_ADC_CHG_ISENSE] = {
+ CONV_TYPE_DIRECT, -512, 2, 0, 5000, 1023,
+ },
+ [CPCAP_ADC_BATTI_ADC] = {
+ CONV_TYPE_DIRECT, -512, 2, 0, 5000, 1023,
+ },
+ [CPCAP_ADC_USB_ID] = {
+ CONV_TYPE_NONE, 0, 0, 0, 1, 1,
+ },
+};
+
+/* Conversion table for bank1 */
+static struct cpcap_adc_conversion_tbl bank1_conversion[CPCAP_ADC_BANK1_NUM] = {
+ [CPCAP_ADC_AD8] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+ [CPCAP_ADC_AD9] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+ [CPCAP_ADC_LICELL] = {CONV_TYPE_DIRECT, 0, 0, 0, 3400, 1023},
+ [CPCAP_ADC_HV_BATTP] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+ [CPCAP_ADC_TSX1_AD12] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+ [CPCAP_ADC_TSX2_AD13] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+ [CPCAP_ADC_TSY1_AD14] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+ [CPCAP_ADC_TSY2_AD15] = {CONV_TYPE_NONE, 0, 0, 0, 1, 1},
+};
+
+/*
+ * Temperature lookup table of register values to milliCelcius.
+ * REVISIT: Check the duplicate 0x3ff entry in a freezer
+ */
+static const int temp_map[MAX_TEMP_LVL][2] = {
+ { 0x03ff, -40000 },
+ { 0x03ff, -35000 },
+ { 0x03ef, -30000 },
+ { 0x03b2, -25000 },
+ { 0x036c, -20000 },
+ { 0x0320, -15000 },
+ { 0x02d0, -10000 },
+ { 0x027f, -5000 },
+ { 0x022f, 0 },
+ { 0x01e4, 5000 },
+ { 0x019f, 10000 },
+ { 0x0161, 15000 },
+ { 0x012b, 20000 },
+ { 0x00fc, 25000 },
+ { 0x00d4, 30000 },
+ { 0x00b2, 35000 },
+ { 0x0095, 40000 },
+ { 0x007d, 45000 },
+ { 0x0069, 50000 },
+ { 0x0059, 55000 },
+ { 0x004b, 60000 },
+ { 0x003f, 65000 },
+ { 0x0036, 70000 },
+ { 0x002e, 75000 },
+ { 0x0027, 80000 },
+ { 0x0022, 85000 },
+ { 0x001d, 90000 },
+};
+
+static irqreturn_t cpcap_adc_irq_thread(int irq, void *data)
+{
+ struct iio_dev *indio_dev = data;
+ struct cpcap_adc *ddata = iio_priv(indio_dev);
+ int error;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ADTRIG_DIS,
+ CPCAP_BIT_ADTRIG_DIS);
+ if (error)
+ return IRQ_NONE;
+
+ ddata->done = true;
+ wake_up_interruptible(&ddata->wq_data_avail);
+
+ return IRQ_HANDLED;
+}
+
+#define CPCAP_CHAN(_type, _index, _address, _datasheet_name) { \
+ .type = (_type), \
+ .address = (_address), \
+ .indexed = 1, \
+ .channel = (_index), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .scan_index = (_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 10, \
+ .storagebits = 16, \
+ .endianness = IIO_CPU, \
+ }, \
+ .datasheet_name = (_datasheet_name), \
+}
+
+/*
+ * The datasheet names are from Motorola mapphone Linux kernel except
+ * for the last two which might be uncalibrated charge voltage and
+ * current.
+ */
+static const struct iio_chan_spec cpcap_adc_channels[] = {
+ CPCAP_CHAN(IIO_TEMP, 0, CPCAP_REG_ADCD0, "battdetb"),
+ CPCAP_CHAN(IIO_VOLTAGE, 1, CPCAP_REG_ADCD1, "battp"),
+ CPCAP_CHAN(IIO_VOLTAGE, 2, CPCAP_REG_ADCD2, "vbus"),
+ CPCAP_CHAN(IIO_TEMP, 3, CPCAP_REG_ADCD3, "ad3"),
+ CPCAP_CHAN(IIO_VOLTAGE, 4, CPCAP_REG_ADCD4, "ad4"),
+ CPCAP_CHAN(IIO_CURRENT, 5, CPCAP_REG_ADCD5, "chg_isense"),
+ CPCAP_CHAN(IIO_CURRENT, 6, CPCAP_REG_ADCD6, "batti"),
+ CPCAP_CHAN(IIO_VOLTAGE, 7, CPCAP_REG_ADCD7, "usb_id"),
+
+ CPCAP_CHAN(IIO_CURRENT, 8, CPCAP_REG_ADCD0, "ad8"),
+ CPCAP_CHAN(IIO_VOLTAGE, 9, CPCAP_REG_ADCD1, "ad9"),
+ CPCAP_CHAN(IIO_VOLTAGE, 10, CPCAP_REG_ADCD2, "licell"),
+ CPCAP_CHAN(IIO_VOLTAGE, 11, CPCAP_REG_ADCD3, "hv_battp"),
+ CPCAP_CHAN(IIO_VOLTAGE, 12, CPCAP_REG_ADCD4, "tsx1_ad12"),
+ CPCAP_CHAN(IIO_VOLTAGE, 13, CPCAP_REG_ADCD5, "tsx2_ad13"),
+ CPCAP_CHAN(IIO_VOLTAGE, 14, CPCAP_REG_ADCD6, "tsy1_ad14"),
+ CPCAP_CHAN(IIO_VOLTAGE, 15, CPCAP_REG_ADCD7, "tsy2_ad15"),
+
+ /* There are two registers with multiplexed functionality */
+ CPCAP_CHAN(IIO_VOLTAGE, 16, CPCAP_REG_ADCD0, "chg_vsense"),
+ CPCAP_CHAN(IIO_CURRENT, 17, CPCAP_REG_ADCD1, "batti2"),
+};
+
+/* ADC calibration functions */
+
+static void cpcap_adc_setup_calibrate(struct cpcap_adc *ddata,
+ enum cpcap_adc_bank0 chan)
+{
+ unsigned int value = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(3000);
+ int error;
+
+ if ((chan != CPCAP_ADC_CHG_ISENSE) &&
+ (chan != CPCAP_ADC_BATTI_ADC))
+ return;
+
+ value |= CPCAP_BIT_CAL_MODE | CPCAP_BIT_RAND0;
+ value |= ((chan << 4) &
+ (CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | CPCAP_BIT_ADA0));
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+ CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX |
+ CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 |
+ CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 |
+ CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 |
+ CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 |
+ CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0,
+ value);
+ if (error)
+ return;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ATOX_PS_FACTOR |
+ CPCAP_BIT_ADC_PS_FACTOR1 |
+ CPCAP_BIT_ADC_PS_FACTOR0,
+ 0);
+ if (error)
+ return;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ADTRIG_DIS,
+ CPCAP_BIT_ADTRIG_DIS);
+ if (error)
+ return;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ASC,
+ CPCAP_BIT_ASC);
+ if (error)
+ return;
+
+ do {
+ schedule_timeout_uninterruptible(1);
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCC2, &value);
+ if (error)
+ return;
+ } while ((value & CPCAP_BIT_ASC) && time_before(jiffies, timeout));
+
+ if (value & CPCAP_BIT_ASC)
+ dev_err(ddata->dev,
+ "Timeout waiting for calibration to complete\n");
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+ CPCAP_BIT_CAL_MODE, 0);
+ if (error)
+ return;
+}
+
+static int cpcap_adc_calibrate(struct cpcap_adc *ddata)
+{
+ unsigned int cal_data[2];
+ unsigned short cal_data_diff;
+ int i, error;
+
+ i = 0;
+ do {
+ cal_data[0] = 0;
+ cal_data[1] = 0;
+ cal_data_diff = 0;
+ cpcap_adc_setup_calibrate(ddata, CPCAP_ADC_CHG_ISENSE);
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1, &cal_data[0]);
+ if (error)
+ return error;
+ cpcap_adc_setup_calibrate(ddata, CPCAP_ADC_CHG_ISENSE);
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1, &cal_data[1]);
+ if (error)
+ return error;
+
+ if (cal_data[0] > cal_data[1])
+ cal_data_diff = cal_data[0] - cal_data[1];
+ else
+ cal_data_diff = cal_data[1] - cal_data[0];
+
+ if (((cal_data[1] >= ST_ADC_CAL_CHRGI_LOWER_THRESHOLD) &&
+ (cal_data[1] <= ST_ADC_CAL_CHRGI_UPPER_THRESHOLD) &&
+ (cal_data_diff <= ST_ADC_CALIBRATE_DIFF_THRESHOLD)) ||
+ (ddata->vendor == CPCAP_VENDOR_TI)) {
+ bank0_conversion[CPCAP_ADC_CHG_ISENSE].cal_offset =
+ ((short)cal_data[1] * -1) + 512;
+ dev_info(ddata->dev,
+ "cpcap_adc_probe: CHRGI Cal complete!\n");
+ break;
+ }
+
+ msleep(5);
+ i++;
+ } while (i > 5);
+
+ i = 0;
+ do {
+ cal_data[0] = 0;
+ cal_data[1] = 0;
+ cal_data_diff = 0;
+ cpcap_adc_setup_calibrate(ddata, CPCAP_ADC_BATTI_ADC);
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2, &cal_data[0]);
+ if (error)
+ return error;
+ cpcap_adc_setup_calibrate(ddata, CPCAP_ADC_BATTI_ADC);
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2, &cal_data[1]);
+ if (error)
+ return error;
+
+ if (cal_data[0] > cal_data[1])
+ cal_data_diff = cal_data[0] - cal_data[1];
+ else
+ cal_data_diff = cal_data[1] - cal_data[0];
+
+ if (((cal_data[1] >= ST_ADC_CAL_BATTI_LOWER_THRESHOLD) &&
+ (cal_data[1] <= ST_ADC_CAL_BATTI_UPPER_THRESHOLD) &&
+ (cal_data_diff <= ST_ADC_CALIBRATE_DIFF_THRESHOLD)) ||
+ (ddata->vendor == CPCAP_VENDOR_TI)) {
+ bank0_conversion[CPCAP_ADC_BATTI_ADC].cal_offset =
+ ((short)cal_data[1] * -1) + 512;
+ dev_info(ddata->dev,
+ "cpcap_adc_probe: BATTI Cal complete!\n");
+ break;
+ }
+
+ msleep(5);
+ i++;
+ } while (i > 5);
+
+ return 0;
+}
+
+/* ADC setup, read and scale functions */
+
+static void cpcap_adc_setup_bank(struct cpcap_adc *ddata,
+ enum cpcap_adc_type type,
+ enum cpcap_adc_timing timing)
+{
+ const struct cpcap_adc_ato *ato = ddata->ato;
+ unsigned short value1 = 0;
+ unsigned short value2 = 0;
+ int error;
+
+ if (!ato)
+ return;
+
+ if (type == CPCAP_ADC_TYPE_BANK_1)
+ value1 |= CPCAP_BIT_AD_SEL1;
+ else if (type == CPCAP_ADC_TYPE_BATT_PI)
+ value1 |= CPCAP_BIT_RAND1;
+
+ switch (timing) {
+ case CPCAP_ADC_TIMING_IN:
+ value1 |= ato->ato_in;
+ value1 |= ato->atox_in;
+ value2 |= ato->adc_ps_factor_in;
+ value2 |= ato->atox_ps_factor_in;
+ break;
+
+ case CPCAP_ADC_TIMING_OUT:
+ value1 |= ato->ato_out;
+ value1 |= ato->atox_out;
+ value2 |= ato->adc_ps_factor_out;
+ value2 |= ato->atox_ps_factor_out;
+ break;
+
+ case CPCAP_ADC_TIMING_IMM:
+ default:
+ break;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+ CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX |
+ CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 |
+ CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 |
+ CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 |
+ CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 |
+ CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0,
+ value1);
+ if (error)
+ return;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ATOX_PS_FACTOR |
+ CPCAP_BIT_ADC_PS_FACTOR1 |
+ CPCAP_BIT_ADC_PS_FACTOR0,
+ value2);
+ if (error)
+ return;
+
+ if (timing == CPCAP_ADC_TIMING_IMM) {
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ADTRIG_DIS,
+ CPCAP_BIT_ADTRIG_DIS);
+ if (error)
+ return;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ASC,
+ CPCAP_BIT_ASC);
+ if (error)
+ return;
+ } else {
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ADTRIG_ONESHOT,
+ CPCAP_BIT_ADTRIG_ONESHOT);
+ if (error)
+ return;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ADTRIG_DIS, 0);
+ if (error)
+ return;
+ }
+}
+
+/*
+ * Occasionally the ADC does not seem to start and there will be no
+ * interrupt. Let's re-init interrupt to prevent the ADC from hanging
+ * for the next request. It is unclear why this happens, but the next
+ * request will usually work after doing this.
+ */
+static void cpcap_adc_quirk_reset_lost_irq(struct cpcap_adc *ddata)
+{
+ int error;
+
+ dev_info(ddata->dev, "lost ADC irq, attempting to reinit\n");
+ disable_irq(ddata->irq);
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_ADTRIG_DIS,
+ CPCAP_BIT_ADTRIG_DIS);
+ if (error)
+ dev_warn(ddata->dev, "%s reset failed: %i\n",
+ __func__, error);
+ enable_irq(ddata->irq);
+}
+
+static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
+ struct cpcap_adc_request *req)
+{
+ int i, error;
+
+ req->timing = CPCAP_ADC_TIMING_IMM;
+ ddata->done = false;
+
+ for (i = 0; i < 5; i++) {
+ cpcap_adc_setup_bank(ddata, req->type, req->timing);
+ error = wait_event_interruptible_timeout(ddata->wq_data_avail,
+ ddata->done,
+ msecs_to_jiffies(50));
+ if (error >= 0)
+ return 0;
+
+ if (error == 0) {
+ cpcap_adc_quirk_reset_lost_irq(ddata);
+ error = -ETIMEDOUT;
+ continue;
+ }
+
+ if (error < 0)
+ return error;
+ }
+
+ return error;
+}
+
+static void cpcap_adc_phase(struct cpcap_adc_request *req, int index)
+{
+ struct cpcap_adc_conversion_tbl *conv_tbl = bank0_conversion;
+ struct cpcap_adc_phasing_tbl *phase_tbl = bank0_phasing;
+ int tbl_index = index;
+
+ if (req->type == CPCAP_ADC_TYPE_BANK_1) {
+ conv_tbl = bank1_conversion;
+ phase_tbl = bank1_phasing;
+ }
+
+ if (req->type == CPCAP_ADC_TYPE_BATT_PI)
+ tbl_index = (tbl_index % 2) ? CPCAP_ADC_BATTI_ADC :
+ CPCAP_ADC_BATTP;
+
+ if (((req->type == CPCAP_ADC_TYPE_BANK_0) ||
+ (req->type == CPCAP_ADC_TYPE_BATT_PI)) &&
+ (tbl_index == CPCAP_ADC_BATTP)) {
+ req->result[index] -= phase_tbl[tbl_index].offset;
+ req->result[index] -= FOUR_POINT_TWO_ADC;
+ req->result[index] *= phase_tbl[tbl_index].multiplier;
+ if (phase_tbl[tbl_index].divider == 0)
+ return;
+ req->result[index] /= phase_tbl[tbl_index].divider;
+ req->result[index] += FOUR_POINT_TWO_ADC;
+ } else {
+ req->result[index] += conv_tbl[tbl_index].cal_offset;
+ req->result[index] += conv_tbl[tbl_index].align_offset;
+ req->result[index] *= phase_tbl[tbl_index].multiplier;
+ if (phase_tbl[tbl_index].divider == 0)
+ return;
+ req->result[index] /= phase_tbl[tbl_index].divider;
+ req->result[index] += phase_tbl[tbl_index].offset;
+ }
+
+ if (req->result[index] < phase_tbl[tbl_index].min)
+ req->result[index] = phase_tbl[tbl_index].min;
+ else if (req->result[index] > phase_tbl[tbl_index].max)
+ req->result[index] = phase_tbl[tbl_index].max;
+}
+
+/* Looks up temperatures in a table and calculates averages if needed */
+static unsigned short cpcap_adc_table_to_millicelcius(unsigned short value)
+{
+ int i;
+ int result = 0, alpha = 0;
+
+ if (value <= temp_map[MAX_TEMP_LVL - 1][0])
+ return temp_map[MAX_TEMP_LVL - 1][1];
+
+ if (value >= temp_map[0][0])
+ return temp_map[0][1];
+
+ for (i = 0; i < MAX_TEMP_LVL - 1; i++) {
+ if ((value <= temp_map[i][0]) &&
+ (value >= temp_map[i + 1][0])) {
+ if (value == temp_map[i][0]) {
+ result = temp_map[i][1];
+ } else if (value == temp_map[i + 1][0]) {
+ result = temp_map[i + 1][1];
+ } else {
+ alpha = ((value - temp_map[i][0]) * 1000) /
+ (temp_map[i + 1][0] - temp_map[i][0]);
+
+ result = temp_map[i][1] +
+ ((alpha * (temp_map[i + 1][1] -
+ temp_map[i][1])) / 1000);
+ }
+ break;
+ }
+ }
+
+ return result;
+}
+
+static void cpcap_adc_convert(struct cpcap_adc_request *req, int index)
+{
+ struct cpcap_adc_conversion_tbl *conv_tbl = bank0_conversion;
+ int tbl_index = index;
+
+ if (req->type == CPCAP_ADC_TYPE_BANK_1)
+ conv_tbl = bank1_conversion;
+
+ if (req->type == CPCAP_ADC_TYPE_BATT_PI)
+ tbl_index = (tbl_index % 2) ? CPCAP_ADC_BATTI_ADC :
+ CPCAP_ADC_BATTP;
+
+ if (conv_tbl[tbl_index].conv_type == CONV_TYPE_DIRECT) {
+ req->result[index] *= conv_tbl[tbl_index].multiplier;
+ if (conv_tbl[tbl_index].divider == 0)
+ return;
+ req->result[index] /= conv_tbl[tbl_index].divider;
+ req->result[index] += conv_tbl[tbl_index].conv_offset;
+ } else if (conv_tbl[tbl_index].conv_type == CONV_TYPE_MAPPING)
+ req->result[index] =
+ cpcap_adc_table_to_millicelcius(req->result[tbl_index]);
+}
+
+static int cpcap_adc_read_bank_scaled(struct cpcap_adc *ddata,
+ struct cpcap_adc_request *req,
+ const unsigned long channel_mask)
+{
+ unsigned int i;
+ int cal_data, error;
+
+ if (ddata->vendor == CPCAP_VENDOR_TI) {
+ cal_data = 0;
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1, &cal_data);
+ if (error)
+ return error;
+ bank0_conversion[CPCAP_ADC_CHG_ISENSE].cal_offset =
+ ((short)cal_data * -1) + 512;
+ }
+
+ if (ddata->vendor == CPCAP_VENDOR_TI) {
+ cal_data = 0;
+ error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2, &cal_data);
+ if (error)
+ return error;
+ bank0_conversion[CPCAP_ADC_BATTI_ADC].cal_offset =
+ ((short)cal_data * -1) + 512;
+ }
+
+ for_each_set_bit(i, &channel_mask, 8) {
+ int addr = CPCAP_REG_ADCD0 + i * 4;
+
+ error = regmap_read(ddata->reg, addr, &req->result[i]);
+ if (error)
+ return error;
+
+ req->result[i] &= 0x3ff;
+ cpcap_adc_phase(req, i);
+ cpcap_adc_convert(req, i);
+ }
+
+ return 0;
+}
+
+static int cpcap_adc_read(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct cpcap_adc *ddata = iio_priv(indio_dev);
+ struct cpcap_adc_request req;
+ int index, error;
+
+ if (chan->channel < 8) {
+ index = chan->channel;
+ req.type = CPCAP_ADC_TYPE_BANK_0;
+ } else if (chan->channel < 16) {
+ index = chan->channel - 8;
+ req.type = CPCAP_ADC_TYPE_BANK_1;
+ } else if (chan->channel < 18) {
+ index = chan->channel - 16;
+ req.type = CPCAP_ADC_TYPE_BATT_PI;
+ } else {
+ return -EINVAL;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&ddata->lock);
+ error = cpcap_adc_start_bank(ddata, &req);
+ if (error)
+ goto err_unlock;
+ error = regmap_read(ddata->reg, chan->address, val);
+ if (error)
+ goto err_unlock;
+ mutex_unlock(&ddata->lock);
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&ddata->lock);
+ error = cpcap_adc_start_bank(ddata, &req);
+ if (error)
+ goto err_unlock;
+ error = cpcap_adc_read_bank_scaled(ddata, &req, BIT(index));
+ if (error)
+ goto err_unlock;
+ mutex_unlock(&ddata->lock);
+ *val = req.result[index];
+ break;
+ default:
+ break;
+ }
+
+ return IIO_VAL_INT;
+
+err_unlock:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "error reading ADC: %i\n", error);
+
+ return error;
+}
+
+static const struct iio_info cpcap_adc_info = {
+ .read_raw = &cpcap_adc_read,
+ .driver_module = THIS_MODULE,
+};
+
+/*
+ * Configuration for Motorola mapphone series such as droid 4.
+ * Copied from the Motorola mapphone kernel tree.
+ */
+static const struct cpcap_adc_ato mapphone_adc = {
+ .ato_in = 0x0480,
+ .atox_in = 0,
+ .adc_ps_factor_in = 0x0200,
+ .atox_ps_factor_in = 0,
+ .ato_out = 0,
+ .atox_out = 0,
+ .adc_ps_factor_out = 0,
+ .atox_ps_factor_out = 0,
+};
+
+static const struct of_device_id cpcap_adc_id_table[] = {
+ {
+ .compatible = "motorola,cpcap-adc",
+ },
+ {
+ .compatible = "motorola,mapphone-cpcap-adc",
+ .data = &mapphone_adc,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cpcap_adc_id_table);
+
+static int cpcap_adc_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct cpcap_adc *ddata;
+ struct iio_dev *indio_dev;
+ struct iio_buffer *buf;
+ int error;
+
+ match = of_match_device(of_match_ptr(cpcap_adc_id_table),
+ &pdev->dev);
+ if (!match)
+ return -EINVAL;
+
+ if (!match->data) {
+ dev_err(&pdev->dev, "no configuration data found\n");
+
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ddata));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "failed to allocate iio device\n");
+
+ return -ENOMEM;
+ }
+ ddata = iio_priv(indio_dev);
+ ddata->ato = match->data;
+ ddata->dev = &pdev->dev;
+
+ mutex_init(&ddata->lock);
+ init_waitqueue_head(&ddata->wq_data_avail);
+
+ indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->channels = cpcap_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(cpcap_adc_channels);
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->info = &cpcap_adc_info;
+
+ ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor);
+ if (error)
+ return error;
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ ddata->irq = platform_get_irq_byname(pdev, "adcdone");
+ if (!ddata->irq)
+ return -ENODEV;
+
+ error = devm_request_threaded_irq(&pdev->dev, ddata->irq, NULL,
+ cpcap_adc_irq_thread, IRQ_NONE,
+ "cpcap-adc", indio_dev);
+ if (error) {
+ dev_err(&pdev->dev, "could not get irq: %i\n",
+ error);
+
+ return error;
+ }
+
+ error = cpcap_adc_calibrate(ddata);
+ if (error)
+ return error;
+
+ buf = devm_iio_kfifo_allocate(&indio_dev->dev);
+ if (!buf)
+ return -ENOMEM;
+
+ iio_device_attach_buffer(indio_dev, buf);
+
+ dev_info(&pdev->dev, "CPCAP ADC device probed\n");
+
+ return iio_device_register(indio_dev);
+}
+
+static int cpcap_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+ iio_device_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_driver cpcap_adc_driver = {
+ .driver = {
+ .name = "cpcap_adc",
+ .of_match_table = of_match_ptr(cpcap_adc_id_table),
+ },
+ .probe = cpcap_adc_probe,
+ .remove = cpcap_adc_remove,
+};
+
+module_platform_driver(cpcap_adc_driver);
+
+MODULE_ALIAS("platform:cpcap_adc");
+MODULE_DESCRIPTION("CPCAP ADC driver");
+MODULE_AUTHOR("Motorola and Tony Lindgren <tony@xxxxxxxxxxx");
+MODULE_LICENSE("GPL v2");
--
2.11.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
