On Sat, Mar 11, 2017 at 12:31:24PM -0800, Steve Longerbeam wrote: > > > On 03/11/2017 05:41 AM, Sakari Ailus wrote: > >Hi Steve, > > > >On Thu, Mar 09, 2017 at 08:52:58PM -0800, Steve Longerbeam wrote: > >>If the pads on both sides of a link specify a frame interval, then > >>those frame intervals should match. Create the exported function > >>v4l2_subdev_link_validate_frame_interval() to verify this. This > >>function can be called in a subdevice's media_entity_operations > >>or v4l2_subdev_pad_ops link_validate callbacks. > >> > >>Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> > > > >If your only goal is to configure frame dropping on a sub-device, I suggest > >to implement s_frame_interval() on the pads of that sub-device only. The > >frames are then dropped according to the configured frame rates between the > >sink and source pads. Say, configuring sink for 1/30 s and source 1/15 would > >drop half of the incoming frames. > > > >Considering that supporting specific frame interval on most sub-devices adds > >no value or is not the interface through which it the frame rate configured, > >I think it is overkill to change the link validation to expect otherwise. > > > Well, while I think this function might still have validity in the future, I > do agree with you that a subdev that has no control over > frame rate has no business implementing the get|set ops. > > In the imx-media subdevs, the only one that can affect frame rate (via > frame skipping) is the CSI. So I'll go ahead and remove the > [gs]_frame_interval ops from the others. I can remove this patch as > a result. Agreed. -- Sakari Ailus e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
