Hi Steve, On Thu, Mar 09, 2017 at 08:52:58PM -0800, Steve Longerbeam wrote: > If the pads on both sides of a link specify a frame interval, then > those frame intervals should match. Create the exported function > v4l2_subdev_link_validate_frame_interval() to verify this. This > function can be called in a subdevice's media_entity_operations > or v4l2_subdev_pad_ops link_validate callbacks. > > Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> If your only goal is to configure frame dropping on a sub-device, I suggest to implement s_frame_interval() on the pads of that sub-device only. The frames are then dropped according to the configured frame rates between the sink and source pads. Say, configuring sink for 1/30 s and source 1/15 would drop half of the incoming frames. Considering that supporting specific frame interval on most sub-devices adds no value or is not the interface through which it the frame rate configured, I think it is overkill to change the link validation to expect otherwise. -- Kind regards, Sakari Ailus e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
