Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.
Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@xxxxxxxxx>
---
v1 -> v2:
Use independent pools for short (suggested by Gregory Clement)
arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index df47bf1..aa0d225 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -59,7 +59,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
i2c@11000 {
@@ -88,6 +89,9 @@
ethernet@70000 {
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -97,6 +101,9 @@
ethernet@34000 {
status = "okay";
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -159,6 +166,10 @@
status = "okay";
};
+ bm@c8000 {
+ status = "okay";
+ };
+
/* USB part of the eSATA/USB 2.0 port */
usb@58000 {
status = "okay";
@@ -241,6 +252,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 3744ba3..9efcf59 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -71,7 +71,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
internal-regs {
@@ -95,6 +96,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -106,6 +110,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -186,6 +193,10 @@
};
};
+ bm@c8000 {
+ status = "okay";
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
@@ -259,6 +270,10 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
gpio_keys {
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
