Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>
---
.../devicetree/bindings/display/st,stm32-ltdc.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
new file mode 100644
index 0000000..e8d39c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -0,0 +1,36 @@
+* STMicroelectronics STM32 lcd-tft display controller
+
+- ltdc: lcd-tft display controller host
+ must be a sub-node of st-display-subsystem
+ Required properties:
+ - compatible: "st,stm32-ltdc"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ltdc it should contain:
+ - "clk-lcd" for the clock feeding the output pixel clock & IP clock.
+ - resets: reset to be used by the device (defined by use of RCC macro).
+ Required nodes:
+ - Video port for RGB output.
+
+Example:
+
+/ {
+ ...
+ soc {
+ ...
+ ltdc: display-controller@40016800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x40016800 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+ clocks = <&rcc 1 CLK_LCD>;
+ clock-names = "lcd";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ };
+ };
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
