On Mon, Mar 13, 2017 at 08:42:15AM -0300, Mauro Carvalho Chehab wrote: > I don't have myself any hardware with i.MX6. Yet, I believe that > a low cost board like SolidRun Hummingboard - with comes with a > CSI interface compatible with RPi camera modules - will likely > attract users who need to run generic applications on their > devices. As you've previously mentioned about camorama, I've installed it (I run Ubuntu 16.04 with "gnome-flashback-metacity" on the HB) and I'm able to use camorama to view the IMX219 camera sensor. There's some gotcha's though: * you need to start it on the command line, manually specifying which /dev/video device to use, as it always wants to use /dev/video0. With the CODA mem2mem driver loaded, this may not be a camera device: $ v4l2-ctl -d 0 --all Driver Info (not using libv4l2): Driver name : coda Card type : CODA960 Bus info : platform:coda Driver version: 4.11.0 * camorama seems to use the v4lconvert library, and looking at the resulting image quality, is rather pixelated - my guess is that v4lconvert is using a basic algorithm to de-bayer the data. It also appears to only manage 7fps at best. The gstreamer neon debayer plugin appears to be faster and higher quality. * it provides five controls - brightness/contrast/color/hue/white balance, each of which are not supported by the hardware (IMX219 supports gain and analogue gain only.) These controls appear to have no effect on the resulting image. However, using qv4l2 (with the segfault bug in GeneralTab::updateFrameSize() fixed - m_frameSize, m_frameWidth and m_frameHeight can be NULL) provides access to all controls. This can happen if GeneralTab::inputSection() is not called. The USB uvcvideo camera achieves around 24fps with functional controls in camorama (mainly because it provides those exact controls to userspace.) -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html