[PATCH 2/2] ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The A20 SoC has an on-board CAN controller. This patch adds the device node
and the corresponding pinctrl settings for pins PH20 and PH21.

The CAN controller is inherited from the A10 SoC and uses the same driver.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@xxxxxxxxx>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index f7db067..a0417c0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1390,6 +1390,13 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			can0_pins_a: can0@0 {
+				allwinner,pins = "PH20","PH21";
+				allwinner,function = "can";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -1711,5 +1718,13 @@
 			clocks = <&apb1_gates 7>;
 			status = "disabled";
 		};
+
+		can0: can@01c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 4>;
+			status = "disabled";
+		};
 	};
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux