On Fri 2017-03-10 16:17:28, Fabio Estevam wrote:
> On Fri, Mar 10, 2017 at 3:59 PM, Troy Kisky
> <troy.kisky@xxxxxxxxxxxxxxxxxxx> wrote:
> > On 3/9/2017 8:52 PM, Steve Longerbeam wrote:
> >> There is a pin conflict with GPIO_6. This pin functions as a power
> >> input pin to the OV5642 camera sensor, but ENET uses it as the h/w
> >> workaround for erratum ERR006687, to wake-up the ARM cores on normal
> >> RX and TX packet done events. So we need to remove the h/w workaround
> >> to support the OV5642. The result is that the CPUidle driver will no
> >> longer allow entering the deep idle states on the sabrelite.
> >>
> >> This is a partial revert of
> >>
> >> commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
> >> interrupt.")
> >> commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
> >> for ERR006687")
> >>
> >> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> >> ---
> >> arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ----
> >> 1 file changed, 4 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >> index 8413179..89dce27 100644
> >> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >> @@ -270,9 +270,6 @@
> >> txd1-skew-ps = <0>;
> >> txd2-skew-ps = <0>;
> >> txd3-skew-ps = <0>;
> >
> > How about
> >
> > +#if !IS_ENABLED(CONFIG_VIDEO_OV5642)
dts is supposed to be hardware description.
> Or maybe just create a new device tree for using the camera, like
> imx6q-sabrelite-camera.dts.
And it should not depend on configuration. Hardware vendor should be
able to ship board with working device tree...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
