On 3/9/2017 8:52 PM, Steve Longerbeam wrote:
> There is a pin conflict with GPIO_6. This pin functions as a power
> input pin to the OV5642 camera sensor, but ENET uses it as the h/w
> workaround for erratum ERR006687, to wake-up the ARM cores on normal
> RX and TX packet done events. So we need to remove the h/w workaround
> to support the OV5642. The result is that the CPUidle driver will no
> longer allow entering the deep idle states on the sabrelite.
>
> This is a partial revert of
>
> commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
> interrupt.")
> commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
> for ERR006687")
>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> index 8413179..89dce27 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> @@ -270,9 +270,6 @@
> txd1-skew-ps = <0>;
> txd2-skew-ps = <0>;
> txd3-skew-ps = <0>;
How about
+#if !IS_ENABLED(CONFIG_VIDEO_OV5642)
> - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> - fsl,err006687-workaround-present;
+#endif
Is that allowed ?
> status = "okay";
> };
>
> @@ -373,7 +370,6 @@
> MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> /* Phy reset */
> MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
> - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
> >;
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
