From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
This patch adds the device tree graph connecting the input multiplexers
to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU
multiplexers are added as children of the iomuxc-gpr syscon device node.
On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2
CSI1 allow to select between CSI0/1 parallel input pads and the MIPI
CSI-2 virtual channels 0/3.
On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1
CSI1 allow to select between CSI0/1 parallel input pads and any of the
four MIPI CSI-2 virtual channels.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
--
- Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu)
- Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..."
to "mipi_vcX...".
- Added input endpoint anchors to the video muxes for the connections
from parallel sensors.
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6dl.dtsi | 180 +++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 116 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl.dtsi | 10 ++-
3 files changed, 305 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 7aa120f..8958c4a 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -181,6 +181,186 @@
"di0", "di1";
};
+&gpr {
+ ipu1_csi0_mux: ipu1_csi0_mux@34 {
+ compatible = "video-multiplexer";
+ reg = <0x34>;
+ bit-mask = <0x7>;
+ bit-shift = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi0_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi0_mux_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi0_mux_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ipu1_csi0_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+ remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+ };
+ };
+ };
+
+ ipu1_csi1_mux: ipu1_csi1_mux@34 {
+ compatible = "video-multiplexer";
+ reg = <0x34>;
+ bit-mask = <0x7>;
+ bit-shift = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi1_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi1_mux_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi1_mux_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ipu1_csi1_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ ipu1_csi1_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+ remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1 {
+ ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+ remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+ };
+};
+
+&mipi_csi {
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+ };
+
+ mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+ };
+
+ mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+ };
+
+ mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+ };
+
+ mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+ };
+ };
+};
+
&vpu {
compatible = "fsl,imx6dl-vpu", "cnm,coda960";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index e9a5d0b..b833b0d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -143,10 +143,18 @@
ipu2_csi0: port@0 {
reg = <0>;
+
+ ipu2_csi0_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+ };
};
ipu2_csi1: port@1 {
reg = <1>;
+
+ ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+ };
};
ipu2_di0: port@2 {
@@ -266,6 +274,80 @@
};
};
+&gpr {
+ ipu1_csi0_mux: ipu1_csi0_mux@4 {
+ compatible = "video-multiplexer";
+ reg = <0x04>;
+ bit-mask = <1>;
+ bit-shift = <19>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi0_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+ remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+ };
+ };
+ };
+
+ ipu2_csi1_mux: ipu2_csi1_mux@4 {
+ compatible = "video-multiplexer";
+ reg = <0x04>;
+ bit-mask = <1>;
+ bit-shift = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu2_csi1_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu2_csi1_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+ remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1 {
+ ipu1_csi1_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+ };
+};
+
&ldb {
clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -312,6 +394,40 @@
};
};
+&mipi_csi {
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ mipi_vc1_to_ipu1_csi1: endpoint {
+ remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ mipi_vc2_to_ipu2_csi0: endpoint {
+ remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ mipi_vc3_to_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+ };
+ };
+};
+
&mipi_dsi {
ports {
port@2 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index d28a413..194badd 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -807,8 +807,10 @@
};
gpr: iomuxc-gpr@020e0000 {
- compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+ compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
reg = <0x020e0000 0x38>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
iomuxc: iomuxc@020e0000 {
@@ -1136,6 +1138,8 @@
mipi_csi: mipi@021dc000 {
compatible = "fsl,imx6-mipi-csi2", "snps,dw-mipi-csi2";
reg = <0x021dc000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 100 0x04>, <0 101 0x04>;
clocks = <&clks IMX6QDL_CLK_HSI_TX>,
<&clks IMX6QDL_CLK_VIDEO_27M>,
@@ -1243,6 +1247,10 @@
ipu1_csi0: port@0 {
reg = <0>;
+
+ ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+ };
};
ipu1_csi1: port@1 {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
