* Balaji T K <balajitk@xxxxxx> [131220 03:41]:
> On Thursday 19 December 2013 10:03 PM, Tony Lindgren wrote:
> >* Balaji T K <balajitk@xxxxxx> [131219 04:40]:
> >>@@ -485,6 +503,7 @@
> >> dmas = <&sdma 61>, <&sdma 62>;
> >> dma-names = "tx", "rx";
> >> status = "disabled";
> >>+ pbias-supply = <&pbias_mmc_reg>;
> >> };
> >>
> >> mmc2: mmc@480b4000 {
> >>diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
> >>index d624345..f127901 100644
> >>--- a/arch/arm/boot/dts/omap2430.dtsi
> >>+++ b/arch/arm/boot/dts/omap2430.dtsi
> >>@@ -29,6 +29,24 @@
> >> pinctrl-single,function-mask = <0x3f>;
> >> };
> >>
> >>+ omap2_scm_general: tisyscon@49002270 {
> >>+ compatible = "ti,control-syscon", "syscon", "simple-bus";
> >>+ reg = <0x49002270 0x240>;
> >>+ #address-cells = <1>;
> >>+ #size-cells = <1>;
> >>+ ranges;
> >>+ pbias_regulator: pbias_regulator {
> >>+ compatible = "ti,pbias-omap";
> >>+ reg = <0x230 0x4>;
> >>+ pbias_mmc_reg: pbias_mmc_omap3 {
> >>+ regulator-name = "pbias_mmc_omap3";
> >>+ regulator-min-microvolt = <1800000>;
> >>+ regulator-max-microvolt = <3000000>;
> >>+ regulator-enable-ramp-delay = <100>;
> >>+ };
> >>+ };
> >>+ };
> >>+
> >> gpio1: gpio@4900c000 {
> >> compatible = "ti,omap2-gpio";
> >> reg = <0x4900c000 0x200>;
> >
> >Here too you may need to set up pbias_mmc_omap2430?
> >
>
> 2430 pbias reg config is same as 3430/3630 w.r.t to mmc pbias i/o,
> hence using the same name, if you think regulator name needs to be changed
> let me know the more appropriate one.
If they are compatible then we should use the earliest revision number
which would be 2430 instead of omap3 :)
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
