On Thursday 19 December 2013 10:03 PM, Tony Lindgren wrote:
* Balaji T K <balajitk@xxxxxx> [131219 04:40]:@@ -485,6 +503,7 @@ dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; status = "disabled"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index d624345..f127901 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -29,6 +29,24 @@ pinctrl-single,function-mask = <0x3f>; }; + omap2_scm_general: tisyscon@49002270 { + compatible = "ti,control-syscon", "syscon", "simple-bus"; + reg = <0x49002270 0x240>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x230 0x4>; + pbias_mmc_reg: pbias_mmc_omap3 { + regulator-name = "pbias_mmc_omap3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <100>; + }; + }; + }; + gpio1: gpio@4900c000 { compatible = "ti,omap2-gpio"; reg = <0x4900c000 0x200>;Here too you may need to set up pbias_mmc_omap2430?
2430 pbias reg config is same as 3430/3630 w.r.t to mmc pbias i/o, hence using the same name, if you think regulator name needs to be changed let me know the more appropriate one. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
