[PATCHv3 09/15] ov2640: update bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Hans Verkuil <hans.verkuil@xxxxxxxxx>

Update the bindings for this device based on a working DT example.

Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/media/i2c/ov2640.txt       | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
index c429b5bdcaa0..48d97c9f3371 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
@@ -1,8 +1,8 @@
 * Omnivision OV2640 CMOS sensor
 
-The Omnivision OV2640 sensor support multiple resolutions output, such as
-CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
-output format.
+The Omnivision OV2640 sensor supports multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
+output formats.
 
 Required Properties:
 - compatible: should be "ovti,ov2640"
@@ -20,20 +20,16 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
 Example:
 
 	i2c1: i2c@f0018000 {
-		ov2640: camera@0x30 {
+		ov2640: camera@30 {
 			compatible = "ovti,ov2640";
 			reg = <0x30>;
-
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_resetb>;
-
-			resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
-			pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
-
-			clocks = <&pck1>;
+			pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+			resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
+			pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			clocks = <&pck0>;
 			clock-names = "xvclk";
-
-			assigned-clocks = <&pck1>;
+			assigned-clocks = <&pck0>;
 			assigned-clock-rates = <25000000>;
 
 			port {
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux