Adds the device tree bindings description for usb2-phy grf of RK3328 platform. Changes in v2: - add usb2-phy grf specification Chagnes in v3: - remove the example of usb2-phy grf Signed-off-by: Meng Dongyang <daniel.meng@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/soc/rockchip/grf.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index 013e71a..af5b44d 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -7,6 +7,8 @@ From RK3368 SoCs, the GRF is divided into two sections, - GRF, used for general non-secure system, - PMUGRF, used for always on system +On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, + Required Properties: - compatible: GRF should be one of the followings @@ -19,6 +21,8 @@ Required Properties: - compatible: PMUGRF should be one of the followings - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 +- compatible: USB2PHYGRF should be one of the followings + - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 - reg: physical base address of the controller and length of memory mapped region. -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html