On Wednesday, February 22, 2017 3:37:35 PM CET David Miller wrote: > From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> > Date: Mon, 20 Feb 2017 20:10:58 +0100 > > > This patch adds glue-code that allows the EMAC driver to interface > > with the existing dt-supported PHYs in drivers/net/phy. > > > > Because currently, the emac driver maintains a small library of > > supported phys for in a private phy.c file located in the drivers > > directory. > > > > The support is limited to mostly single ethernet transceiver like the: > > CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035. > > > > However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W) > > have a 5-port switch (AR8327N) attached to the EMAC. The switch chip > > is supported by the qca8k mdio driver, which uses the generic phy > > library. Another reason is that PHYLIB also supports the BCM54610, > > which was used for the Western Digital My Book Live. > > > > This will now also make EMAC select PHYLIB. > > > > Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> > > Applied, thanks. > Thanks David. I noticed that the DT Documentation patch: "[v1,1/2] dt: emac: document device-tree based phy discovery and setup" is still pending with "Changes Requested": <https://patchwork.ozlabs.org/patch/729658/> I think this is because of Florian's comment on patch: "[v1,2/2] net: emac: add support for device-tree based PHY discovery and setup" If so, can you please queue this documentation update patch for -next? (I haven't received any comments or complains. If necessary, I can also resent it.) Thanks, Christian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
