From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> Date: Mon, 20 Feb 2017 20:10:58 +0100 > This patch adds glue-code that allows the EMAC driver to interface > with the existing dt-supported PHYs in drivers/net/phy. > > Because currently, the emac driver maintains a small library of > supported phys for in a private phy.c file located in the drivers > directory. > > The support is limited to mostly single ethernet transceiver like the: > CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035. > > However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W) > have a 5-port switch (AR8327N) attached to the EMAC. The switch chip > is supported by the qca8k mdio driver, which uses the generic phy > library. Another reason is that PHYLIB also supports the BCM54610, > which was used for the Western Digital My Book Live. > > This will now also make EMAC select PHYLIB. > > Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
