Rename oc-delay-* to oc-delay-us and make it expect a time value. Furthermore add -ms suffix to power-on-time. These changes were suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/usb251xb.txt | 9 +++--- drivers/usb/misc/usb251xb.c | 32 +++++++++++++--------- 2 files changed, 24 insertions(+), 17 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index a5efd10..4d6bd73 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -31,7 +31,8 @@ Optional properties : (default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered operation if the local power source is removed or unavailable - - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) + - oc-delay-us : microseconds over current timer delay, valid values are 100, + 4000, 8000 (default) and 16000. All other values are rounded up. - compound-device : indicated the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, @@ -40,9 +41,9 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - power-on-time : Specifies the time it takes from the time the host initiates - the power-on sequence to a port until the port has adequate power. The - value is given in ms in a 0 - 510 range (default is 100ms). + - power-on-time-ms : Specifies the time it takes from the time the host + initiates the power-on sequence to a port until the port has adequate + power. The value is given in ms in a 0 - 510 range (default is 100ms). Examples: usb2512b@2c { diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 3f9c306..58b887a 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -375,18 +375,24 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, if (of_get_property(np, "dynamic-power-switching", NULL)) hub->conf_data2 |= BIT(7); - if (of_get_property(np, "oc-delay-100us", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-4ms", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 |= BIT(4); - } else if (of_get_property(np, "oc-delay-8ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-16ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 |= BIT(4); + if (!of_property_read_u32(np, "oc-delay-us", property_u32)) { + if (*property_u32 < 100) { + /* 100 us*/ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 &= ~BIT(4); + } else if (*property_u32 < 4000) { + /* 4 ms */ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 |= BIT(4); + } else if (*property_u32 < 8000) { + /* 8 ms */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 &= ~BIT(4); + } else { + /* 16 ms */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 |= BIT(4); + } } if (of_get_property(np, "compound-device", NULL)) @@ -433,7 +439,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, } hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; - if (!of_property_read_u32(np, "power-on-time", property_u32)) + if (!of_property_read_u32(np, "power-on-time-ms", property_u32)) hub->power_on_time = min_t(u8, be32_to_cpu(*property_u32) / 2, 255); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
